Hi Noel, Thanks for you suggestions
Noel wrote: > BUT you need to be sure that the BIOS of the 486/Pentium computer > supports booting from network card. Please double-check that before > buying the netword cards or the bootROMs. So how do i figure this out ??? - go into bios setup and check i suppose would this not being enabled make these machines unusable - is there a work around >> >>> Which is preferable PCI or ISA >>> >>> >> PCI. Assuming there is PCI slot in those 486's >> i did have a peek and there were a few pci slots each - will confirm again > > As far as cable allows is not the best if you are using network swap and > remote X altogether. Best if you constrain to 25 meters from switch both > for terminals and server. > thats more than adequate - was looking more at about 10 - 15 meters max thanks ram ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
