I have a problem, in that some USB memory keys are not loaded correctly. I am confident that our server is working correctly for local devices, with correct client hostnames, fuse set-up etc. I have done loads of research, but beyond the suggestion of formatting the drive, have not come across any resolution.
The symptoms are that, on the client shell, the USB auto-detection finishes with: sda: Unknown partition table There is nothing in /tmp/drives. If, on the client, I then type: # mkdir /tmp/drives/DriveName # mount -t vfat /dev/sda /tmp/drives/DriveName They mount fine and the contents are visible on the client (but not from the desktop). So it would seem that there is nothing inherently wrong... it's just the auto-detection which isn't working. I suspect that formatting the USB key would work, but I've already got more empty working USB keys than I will ever find a use for - what I need is to be able to access the data - without resorting to Windows! So is there some way in which I can modify our configuration to enable these drives to be loaded automatically? Failing that, is there some way to do it manually each time. Thanks! --- Kind regards, Chris Roberts ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
