Hi, - please see my comments/questions in-line..
CyberOrg skrev: > On Wed, Jul 9, 2008 at 6:54 PM, Verner Kjærsgaard <[EMAIL PROTECTED]> wrote: > >>>> You can start by specifying XSERVER=vesa, that should work in most >>>> cases, what graphics hardware have you got on those clients? >>>> >>>> Do not use xorg.conf file for now. >>>> > >>> I've got ATI Radeon something on the IBM TPs and NVIDIA something on the >>> DELL. >>> >>> >> I just tried the vesa option, this causes the IBM TP to rest at runlevel >> 3 after boot, no flashing though. >> >> I do the modif'd with the SuSE10.3 xorg.conf, things work again... >> > > Copy /srv/tftpboot/KIWI/config.default to > /srv/tftpboot/KIWI/config.MAC (replace MAC with actual mac address of > the clients), How do I specify the MAC adr, with or without dashes..? add xorg.conf for each client that require special > configuration, append the file with xorg.conf as below: > > ,/KIWI/xorg.conf.ati;/etc/X11/xorg.conf;10.0.0.254 The "xorg.conf.ati" is now for IBM TP clients, I could add lot more xorg.confs named whatever following this scheme, right? I would then note each and everyone of them subsequently by appending to the line as stated? I.e. I would append something like: ,/KIWI/xorg.conf.ati;/etc/X11/xorg.conf;10.0.0.254,/KIWI/xorg.conf.nvidia;/etc/X11/xorg.conf;10.0.0.254 and so on? > > Cheers > > -J > -- -------------------------------------------- Med venlig hilsen/best regards Verner Kjærsgaard Novell Certified Linux Professional 10035701 ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
