Check the networking in the VM.

For example, change to:  SCREEN_07=shell
and make sure that the client can ping the hostname you are trying.  If
not, check pinging the IP.  A network issue would explain both the
failed login and the rdesktop screen failing to appear.

-Gadi

On Tue, 2009-09-01 at 15:47 -0600, David Burgess wrote:
> Experts,
> 
> I am testing ltsp's RDP capabilities with hopes to substitute PXE
> booting on HP thin clients that currently boot from slow local flash.
> I have done standard ltsp deployments in the past that just worked
> without too much fuss, so I'm at something of a loss that things
> aren't working out this time around. I would appreciate some hints.
> 
> Fresh install of Ubuntu 9.04 x86_64 from alternate CD onto ESXi server.
> did: apt-get dist-upgrade
> did: ltsp-build-image --arch=i386
> did: apt-get install open-vm-toolkit (supposed to install open-source
> vmware-tools with GUI, but haven't seen the utility yet)
> 
> Without creating /var/lib/tftpboot/ltsp/i386/lts.conf a client is able
> to pxeboot to ldm login screen, however when I attempt to log in with
> a valid account, the prompt says "verifying user name and password"
> for 20 seconds or so and then the ldm screen reloads. Not good, but
> then I'm not planning to use a linux login on this system anyway.
> 
> So I create lts.conf thus:
> [default]
> SCREEN_07=rdesktop
> RDP_SERVER=fvtc001
> 
> and reboot the tc. The Ubuntu splash screen comes up and the progress
> bar completes. the screen flashes to black, and when the login screen
> should appear I see nothing but shades of black, as if the screen is
> changing modes. After 30 minutes or so the screen is still black but
> has not gone into power-saver mode.
> 
> I added the following line into lts.conf, which is copied directly
> from a flash-booted thin client that is connected:
> RDP_OPTIONS="-dGPRC -f -a24 -rsound:local -ken-us -z -rdisk:usbdev
> /media/usb0 fvtc001"
> 
> but no difference.
> 
> I logged into the server console and used alt-F2 to run "rdesktop
> fvtc001" and I get my Vista login screen, so it appears the network is
> in order and the rdesktop package is compatible.
> 
> I enabled remote syslogging on the server, but I don't see anything
> looking like an error coming from the tc. Oddly though, messages that
> appear to be boot messages continue to enter into the syslog for
> several minutes after the black screen appears.
> 
> I enable ssh in the image and rebooted. Here is the output of netstat -natp:
> # netstat -natp
> Active Internet connections (servers and established)
> Proto Recv-Q Send-Q Local Address           Foreign Address
> State       PID/Program name
> tcp        0      0 0.0.0.0:16001         0.0.0.0:*
> LISTEN      3141/pulseaudio
> tcp        0      0 0.0.0.0:4713           0.0.0.0:*
> LISTEN      3141/pulseaudio
> tcp        0      0 0.0.0.0:22               0.0.0.0:*
> LISTEN      2941/sshd
> tcp        0      0 0.0.0.0:6007           0.0.0.0:*
> LISTEN      9976/X
> tcp        0      0 172.21.33.115:35707  172.21.33.100:2001
> ESTABLISHED 2694/nbd-client
> tcp        0      0 172.21.33.115:22     172.21.33.101:1410
> ESTABLISHED 6742/0
> tcp6       0      0 :::16001                :::*
> LISTEN      3141/pulseaudio
> tcp6       0      0 :::4713                 :::*
>  LISTEN      3141/pulseaudio
> tcp6       0      0 :::22                   :::*
>    LISTEN      2941/sshd
> tcp6       0      0 :::6007                 :::*
>  LISTEN      9976/X
> #
> 
> and
> # dmesg | tail
> [   19.205206] nbd0: NBD_DISCONNECT
> [   19.207579] nbd0: Receive control failed (result -32)
> [   19.207752] nbd0: queue cleared
> [   19.234800] nbd0: Attempted send on closed socket
> [   19.234835] end_request: I/O error, dev nbd0, sector 370372
> [   19.234903] SQUASHFS error: sb_bread failed reading block 0x2d362
> [   19.234922] SQUASHFS error: Unable to read cache block [b4d896e:152e]
> [   19.234954] SQUASHFS error: Unable to read inode [b4d896e:152e]
> [   30.514845] pci 0000:01:00.0: PCI INT A -> Link[LNK3] -> GSI 3
> (level, low) -> IRQ 3
> [   30.616337] [drm] Initialized drm 1.1.0 20060810
> [   30.692796] [drm] Initialized radeon 1.29.0 20080528 on minor 0
> [   36.043224] mtrr: no MTRR for e0000000,1000000 found
> [   40.514294] mtrr: no MTRR for e0000000,1000000 found
> [   44.824680] mtrr: no MTRR for e0000000,1000000 found
> [   49.086365] mtrr: no MTRR for e0000000,1000000 found
> [   53.327864] mtrr: no MTRR for e0000000,1000000 found
> [   57.551481] mtrr: no MTRR for e0000000,1000000 found
> [   61.747132] mtrr: no MTRR for e0000000,1000000 found
> [   65.938570] mtrr: no MTRR for e0000000,1000000 found
> [   70.123066] mtrr: no MTRR for e0000000,1000000 found
> [   74.300712] mtrr: no MTRR for e0000000,1000000 found
> [   78.476490] mtrr: no MTRR for e0000000,1000000 found
> [   82.646046] mtrr: no MTRR for e0000000,1000000 found
> [   86.824187] mtrr: no MTRR for e0000000,1000000 found
> [   90.997380] mtrr: no MTRR for e0000000,1000000 found
> [   95.173634] mtrr: no MTRR for e0000000,1000000 found
> [   99.370490] mtrr: no MTRR for e0000000,1000000 found
> [  103.670626] mtrr: no MTRR for e0000000,1000000 found
> [  107.870529] mtrr: no MTRR for e0000000,1000000 found
> 
> 
> Any ideas?
> 
> db
> 
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
> trial. Simplify your report design, integration and deployment - and focus on 
> what you do best, core application coding. Discover what's new with 
> Crystal Reports now.  http://p.sf.net/sfu/bobj-july
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.freenode.net
-- 
--------------------------------------------------------
Gideon Romm | Proud LTSP Developer
[email protected]

Pay It Forward!  
Intel Atom 1.6GHz, 512MB RAM + Symbiont Boot Stick = $275
10% of order goes to school or open source project of your choice!

Buy yourself a lab or office and use your donation to set up a school,
pay for a desperately needed feature added to a software package,
or sponsor part of LTSP's annual developer's conference LTSP-by-the-sea!

Check out:  http://www.symbio-technologies.com/payitforward 


------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to