On Monday 11 January 2010 19:00:45 ltsp-discuss-requ...@lists.sourceforge.net
wrote:
> Hello, please reply with your lts.conf
No help there :-)
[default]
LDM_DIRECTX=True
[00:0f:ea:59:9f:22]
SERVER = "192.168.5.77"
X_MODE_0 = 1280x1024
X_VERTREFRESH = 60
Thanks
James
> On Mon, Jan 11, 2010 at 8:47 AM, james <j...@tigger.ws> wrote:
> > G'day
> >
> > With the latest karmic - ltsp setup Of the first 3 thin clients I tried 1
> > works.
> >
> > #2 asus m2n68-am and samsung monitor - Display out of range.
> >
> > The probe discovers correct stuff
> > ..
> > (II) NV(0): Probing for EDID on I2C bus A...
> > (II) NV(0): I2C device "DDC:E-EDID segment register" registered at
> > address 0x60.
> > (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
> > (II) NV(0): ? ... none found
> > (II) NV(0): Probing for EDID on I2C bus B...
> > (--) NV(0): DDC detected a CRT:
> > (II) NV(0): Manufacturer: SAM ?Model: 1e1 ?Serial#: 1212231993
> > (II) NV(0): Year: 2006 ?Week: 27
> > (II) NV(0): EDID Version: 1.3
> > (II) NV(0): Analog Display Input, ?Input Voltage Level: 0.700/0.300 V
> > (II) NV(0): Sync: ?Separate ?Composite ?SyncOnGreen
> > (II) NV(0): Max Image Size [cm]: horiz.: 38 ?vert.: 30
> > (II) NV(0): Gamma: 2.20
> > (II) NV(0): DPMS capabilities: Off; RGB/Color Display
> > (II) NV(0): First detailed timing is preferred mode
> > (II) NV(0): redX: 0.640 redY: 0.329 ? greenX: 0.300 greenY: 0.600
> > (II) NV(0): blueX: 0.150 blueY: 0.060 ? whiteX: 0.313 whiteY: 0.329
> > (II) NV(0): Supported established timings:
> > (II) NV(0): 720x...@75hz
> > [snip]
> > (II) NV(0): 1024x...@75hz
> > (II) NV(0): 1280x1...@75hz
> > (II) NV(0): 1152x...@75hz
> > (II) NV(0): Manufacturer's mask: 0
> > (II) NV(0): Supported standard timings:
> > (II) NV(0): #0: hsize: 1280 ?vsize 1024 ?refresh: 60 ?vid: 32897
> > (II) NV(0): #1: hsize: 1280 ?vsize 960 ?refresh: 60 ?vid: 16513
> > (II) NV(0): #2: hsize: 1152 ?vsize 864 ?refresh: 75 ?vid: 20337
> > (II) NV(0): Supported detailed timing:
> > (II) NV(0): clock: 108.0 MHz ? Image Size: ?376 x 301 mm
> > (II) NV(0): h_active: 1280 ?h_sync: 1328 ?h_sync_end 1440 h_blank_end
> > 1688 h_border: 0
> > (II) NV(0): v_active: 1024 ?v_sync: 1025 ?v_sync_end 1028 v_blanking:
> > 1066 v_border: 0
> > (II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz,
> > PixClock max 140 MHz
> > (II) NV(0): Monitor name: SyncMaster
> > (II) NV(0): Serial No: HMCL700620
> > (II) NV(0): EDID (in hex):
> > ...
> > So it finds 1280x1...@60hz then does not use it.
> > All X_MODE and X_VERTREFRESH lines are utterly ignored.
> >
> > #3
> > Try a gigabyte GA-MA78GM-S2H, same monitor. It runs 800x600 and again
> > ignores X_MODE and X_VERTREFRESH in lts.conf.
> >
> > What is happening? Is this going back to hand crafted xorg.conf files?
> >
> > BTW installing karmic on this hardware works correctly
> > James
>
------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
