I agree with Warren and if that doesnt resolve the problem check to see that, even though unlikely, you could still have the same MAC address on both unit.
ARP, Address Resolution Protocol, gets a MAC address and assigns an IP for each one. If the MAC address is the same that would show the same IP for both units. If the cards you are using are Netgear due to the problems they are having with a particular card, go to the Netgear site and download the software fix to resolve the MAC problem. ----- Original Message ----- From: "Warren Togami" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, August 25, 2002 4:40 PM Subject: Re: [luau] OT: windows 2000 networking > ----- Original Message ----- > From: "Rodney Kanno" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, August 25, 2002 4:02 PM > Subject: [luau] OT: windows 2000 networking > > > > I have two machines running windows 2000 and I am having problems getting > the > > two machines to see each other. Hopefully someone can enlighten me on my > problem. > > > > > > Both machines are connected to a router, which is then hooked up to my > cable > > modem. The router assigns IP's to the machines via DHCP, and the gateway > set > > on both machines are identical, as well as the workgroup. Both machines > can > > browse the internet, but cannot "see" each other on the network. This same > configuration > > works fine when both machines run windows 98. Does windows 2000 handle > netowrking > > differntly? Am I missing something here? > > > > Thanks, > > Rodney > > Check that "NETBIOS over TCP/IP" is enabled, and you have "File and Print > Sharing" and "Client for Microsoft Networks" attached to the network > interfaces. I think that's all that is needed. > > > _______________________________________________ > LUAU mailing list > [EMAIL PROTECTED] > http://videl.ics.hawaii.edu/mailman/listinfo/luau
