Russell Coker <[email protected]> writes: > On Sunday, 15 September 2024 09:11:56 AEST Brian May via luv-main wrote: >> nvme nvme0: Device not ready: aborting the reset, CSTS=0x9 >> nvme nvme0: Disabling device after reset failure: -19 > > If it gives these sorts of error on the same software configuration that > previously worked then it might be a failing NVMe device. Have you tried > using a different NVMe device?
Hmmm. I guess that possibility does concern me. But: * Computer appears to work fine without suspend resume. I guess maybe suspend resume might be adding more stress to the system or something. * Purchased this May 2023. Is still under warranty. Might be challenging trying to proof that the NVMe is defective though when it only happens after suspend/resume on Linux. Assuming this is covered and not considered normal wear and tear or something. * Unfortunately I don't have a spare NVMe. Maybe I should get one. Any brands I should avoid or go for? I have seen instructions on scanning for bad blocks, and marking them, e.g. https://askubuntu.com/questions/857936/how-to-read-the-current-bad-blocks-list-for-the-disk (I think this requires booting from USB), but my suspicion, is that this is a bit more then just some blocks going bad, and more like the entire drive going offline. -- Brian May @ Linux Penguins _______________________________________________ luv-main mailing list -- [email protected] To unsubscribe send an email to [email protected]
