Trying to add clarity to what I just sent …
With the end of the blade of the putty knife in a horizontal posture, push …
Bob
From: M100 [mailto:[email protected]] On Behalf Of Bob Pigford
Sent: Wednesday, April 15, 2015 4:22 PM
To: 'Model 100 Discussion'
Subject: Re: [M100] Disassembling Model 200
You might try a putty knife on its side placed at the top center of the ribbon
cable cover. And as Steve says, push in and slightly down and it usually pops
out. Good luck!
Bob
From: M100 [mailto:[email protected]] On Behalf Of Bob Clark
Sent: Wednesday, April 15, 2015 1:14 PM
To: Model 100 Discussion
Subject: [M100] Disassembling Model 200
Hey, all. I just got a Model 200, and I need to disassemble it. I have the
service manual, but I can't figure out how to get the LCD cable cover off. I'm
trying to follow the directions ("Apply force to the upper center portion of
the cable cover and remove it by sliding toward you"). For some reason, pushing
in there doesn't have any give, and rather than just prying at the edges and
busting the thing into god knows how many pieces, I figure I'm just not smart
enough. Any suggestions?
Thanks,
--Bob
