iPhone disassembly kits have a thing that looks like a guitar pick which is perfect for removing that piece without marking the plastic.
> On Apr 16, 2015, at 9:03 AM, Bob Clark <[email protected]> wrote: > > Thanks, everyone. I just started pushing really, REALLY hard, heard a loud > crack (and figured I broke it, but no, it's fine), and it came off. > >> On Wed, Apr 15, 2015 at 4:25 PM, Bob Pigford <[email protected]> wrote: >> Trying to add clarity to what I just sent … >> >> With the end of the blade of the putty knife in a horizontal posture, push … >> >> Bob >> >> >> >> From: M100 [mailto:[email protected]] On Behalf Of Bob >> Pigford >> Sent: Wednesday, April 15, 2015 4:22 PM >> To: 'Model 100 Discussion' >> Subject: Re: [M100] Disassembling Model 200 >> >> >> >> You might try a putty knife on its side placed at the top center of the >> ribbon cable cover. And as Steve says, push in and slightly down and it >> usually pops out. Good luck! >> >> Bob >> >> >> >> From: M100 [mailto:[email protected]] On Behalf Of Bob Clark >> Sent: Wednesday, April 15, 2015 1:14 PM >> To: Model 100 Discussion >> Subject: [M100] Disassembling Model 200 >> >> >> >> Hey, all. I just got a Model 200, and I need to disassemble it. I have the >> service manual, but I can't figure out how to get the LCD cable cover off. >> I'm trying to follow the directions ("Apply force to the upper center >> portion of the cable cover and remove it by sliding toward you"). For some >> reason, pushing in there doesn't have any give, and rather than just prying >> at the edges and busting the thing into god knows how many pieces, I figure >> I'm just not smart enough. Any suggestions? >> >> >> >> Thanks, >> >> --Bob >> >
