Thanks, everyone. I just started pushing really, REALLY hard, heard a loud crack (and figured I broke it, but no, it's fine), and it came off.
On Wed, Apr 15, 2015 at 4:25 PM, Bob Pigford <[email protected]> wrote: > Trying to add clarity to what I just sent … > > With the end of the blade of the putty knife in a horizontal posture, > push … > > Bob > > > > *From:* M100 [mailto:[email protected]] *On Behalf Of *Bob > Pigford > *Sent:* Wednesday, April 15, 2015 4:22 PM > *To:* 'Model 100 Discussion' > *Subject:* Re: [M100] Disassembling Model 200 > > > > You might try a putty knife on its side placed at the top center of the > ribbon cable cover. And as Steve says, push in and slightly down and it > usually pops out. Good luck! > > Bob > > > > *From:* M100 [mailto:[email protected] > <[email protected]>] *On Behalf Of *Bob Clark > *Sent:* Wednesday, April 15, 2015 1:14 PM > *To:* Model 100 Discussion > *Subject:* [M100] Disassembling Model 200 > > > > Hey, all. I just got a Model 200, and I need to disassemble it. I have the > service manual, but I can't figure out how to get the LCD cable cover off. > I'm trying to follow the directions ("Apply force to the upper center > portion of the cable cover and remove it by sliding toward you"). For some > reason, pushing in there doesn't have any give, and rather than just prying > at the edges and busting the thing into god knows how many pieces, I figure > I'm just not smart enough. Any suggestions? > > > > Thanks, > > --Bob >
