See http://www.club100.org/library/sup/tddbelt.txt
Keeper of the Primordial Bit (mother of all bits), -= Ron Wiesen =- _____ From: M100 [mailto:[email protected]] On Behalf Of Barry Rands Sent: Thursday, July 23, 2015 18:16 To: Model 100 Discussion Subject: Re: [M100] TS-DOS "Not Found" Ordered the belt on Ebay based on the specs on the M100 FAQ. An 8.5" belt will require about an inch of stretch, but I suppose that is normal? I measured the belt path and came up with 9.5". On Thu, Jul 23, 2015 at 9:38 AM, John R. Hogerhuis <[email protected]> wrote: Club100 sells the replacement belts. Let me check the archives and see if we have the specs so you can buy it directly if necessary. -- John. On Wed, Jul 22, 2015 at 1:50 PM, Barry Rands <[email protected]> wrote: > Just opened up the drive and yes, the belt is in pieces. Do I need to order > from the club, or is this a stock part I can get from the local Radio Shack > or hardware store? > > On Wed, Jul 22, 2015 at 11:56 AM, Barry Rands <[email protected]> wrote: >> >> Bingo.... the TDD makes noise, so I thought the disk was turning... but it >> is not. Looks like I may need a new belt! Thanks! >> >> On Wed, Jul 22, 2015 at 9:23 AM, ultimate quantifier <[email protected]> >> wrote: >>> >>> floppy disks have a metal center ring with a notch. if you note the >>> position of the notch and try to use it in the drive, then take it out, the >>> position of the notch should change indicating that the drive is moving the >>> disk at least. this may help you to figure out if the belt is suspect. >>> >>> > Date: Wed, 22 Jul 2015 09:09:58 -0700 >>> > From: [email protected] >>> > To: [email protected] >>> > Subject: Re: [M100] TS-DOS "Not Found" >>> > >>> > >>> > >>> > Ken at club100 may be able to get one to you but I think he is a bit >>> > busy with work right now. >>> > Do you have a cassette cable? >>> > I could save the dos100.co file as an mp3 file that you could use to >>> > load ts-dos. Then you could format a new disk with it and save dos100 to the >>> > disk. A bit of a pain but it might get you up and running. >>> > >>> > Kurt >>> > >>> > >>> > ------------------------------ >>> > On Wed, Jul 22, 2015 7:49 AM PDT Barry Rands wrote: >>> > >>> > >No DIP switches on the TDD2. Drive is spinning, so diskette may be >>> > > bad. Any >>> > >way to get a new disk? >>> > > >>> > >On Wed, Jul 22, 2015 at 7:21 AM, Kurt McCullum <[email protected]> >>> > >wrote: >>> > > >>> > >> The disk could be bad or the drive itself might be bad. If the drive >>> > >> isn't spinning check the drive belt. It may be broken. Club100 >>> > >> should have >>> > >> spares. >>> > >> >>> > >> Kurt >>> > >> >>> > >> >>> > >> On 7/22/2015 7:07 AM, Barry Rands wrote: >>> > >> >>> > >> Thanks for the response. I do have the original TS-DOS diskette in >>> > >> the >>> > >> drive. Could it be that the diskette is so old that the file has >>> > >> become >>> > >> corrupted with age? >>> > >> >>> > >> On Wed, Jul 22, 2015 at 6:29 AM, <[email protected]> wrote: >>> > >> >>> > >> TS-DOS is not built into the URII, only a loader program. TS-DOS >>> > >> must >>> > >> be on your TPD disk before it can be loaded. >>> > >> >>> > >> Sent by Outlook <http://taps.io/outlookmobile> for Android >>> > >> >>> > >> >>> > >> >>> > >> On Wed, Jul 22, 2015 at 6:21 AM -0700, "Barry Rands" >>> > >> <[email protected]> >>> >>> > >> wrote: >>> > >> >>> > >> I just resurrected my Model 102 from storage and am trying to get >>> > >> everything running. It has the UR-II ROM with TS-DOS built in, but >>> > >> when I >>> > >> connect the TDD2, all I get is "Not Found" when I enter the TS-DOS >>> > >> program. >>> > >> Any ideas of what might be wrong? >>> > >> >>> > >> -- >>> > >> Barry Rands, PE, LEED AP >>> > >> 81 Encanto Lane >>> > >> San Luis Obispo, CA 93401 >>> > >> 805-704-1549 (cell) >>> > >> 805-783-2038 (home) >>> > >> >>> > >> >>> > >> >>> > >> >>> > >> -- >>> > >> Barry Rands, PE, LEED AP >>> > >> 81 Encanto Lane >>> > >> San Luis Obispo, CA 93401 >>> > >> 805-704-1549 (cell) >>> > >> 805-783-2038 (home) >>> > >> >>> > >> >>> > >> >>> > > >>> > > >>> > >-- >>> > >Barry Rands, PE, LEED AP >>> > >81 Encanto Lane >>> > >San Luis Obispo, CA 93401 >>> > >805-704-1549 (cell) >>> > >805-783-2038 (home) >>> > >> >> >> >> >> -- >> Barry Rands, PE, LEED AP >> 81 Encanto Lane >> San Luis Obispo, CA 93401 >> 805-704-1549 (cell) >> 805-783-2038 (home) > > > > > -- > Barry Rands, PE, LEED AP > 81 Encanto Lane > San Luis Obispo, CA 93401 > 805-704-1549 (cell) > 805-783-2038 (home) -- Barry Rands, PE, LEED AP 81 Encanto Lane San Luis Obispo, CA 93401 805-704-1549 (cell) 805-783-2038 (home)
