So the 100's been plugged in for day, also left it on battery power over night with nvram on both times.. zero response.. tried cold start
Greg On Mon, Mar 13, 2017 at 11:30 PM, Daryn Hanright <[email protected]> wrote: > Cool you got the 102 going Greg. Love the Tandy 102 > > > On Mar 14, 2017 5:50 PM, "Gregory McGill" <[email protected]> wrote: > > That brought the 102 to life, 100 not so much.. will leave it on external > power and see. > > Greg > > On Mon, Mar 13, 2017 at 6:36 PM, John Gardner <[email protected]> wrote: > >> It also happens that the Nicad simply does'nt work any more, >> >> no matter how long it's charged. If a day with external power >> >> connected does'nt resurrect it, I'd be opening it up to inspect; >> >> hopefully it has'nt leaked caustic goo all over the PCB, yet... >> >> ... >> >> >> >> On 3/13/17, Gregory McGill <[email protected]> wrote: >> > thanks! I've never had any problem turning on my other 100 even after >> > sitting forever.. I adjusted the contrast to no avail.. I'll leave >> them >> > powered a while >> > >> > Greg >> > >> > On Mon, Mar 13, 2017 at 10:13 AM, John R. Hogerhuis <[email protected]> >> > wrote: >> > >> >> The m100 and t102 have an internal nicad which must be on and charged. >> >> >> >> Turn the memory power switch on the bottom on, and leave the units >> >> plugged >> >> in for a while. Maybe overnight. >> >> >> >> There's also a contrast knob on the side that may need adjusting. >> >> >> >> This along with a "cold start" almost always works. >> >> >> >> -- John >> >> >> >> >> >> On Mon, Mar 13, 2017 at 10:10 AM Gregory McGill < >> [email protected]> >> >> wrote: >> >> >> >>> I just picked up one of each, they were working before shipping to me >> >>> (seller showed me pictures) but when I try batteries and DC power >> >>> wallwart(from my other working 100) neither do anything. >> >>> >> >>> >> >>> Is there a good flowchart/troubleshooting guide? >> >>> >> >>> Greg >> >>> >> >> >> > >> > > >
