No beep On Mar 15, 2017 10:23 AM, "John R. Hogerhuis" <[email protected]> wrote:
> Turn it on > > <enter> > BEEP<enter> > > On Wed, Mar 15, 2017 at 10:14 AM Gregory McGill <[email protected]> > wrote: > >> So the 100's been plugged in for day, also left it on battery power over >> night with nvram on both times.. zero response.. tried cold start >> >> Greg >> >> On Mon, Mar 13, 2017 at 11:30 PM, Daryn Hanright <[email protected]> >> wrote: >> >> Cool you got the 102 going Greg. Love the Tandy 102 >> >> >> On Mar 14, 2017 5:50 PM, "Gregory McGill" <[email protected]> >> wrote: >> >> That brought the 102 to life, 100 not so much.. will leave it on external >> power and see. >> >> Greg >> >> On Mon, Mar 13, 2017 at 6:36 PM, John Gardner <[email protected]> wrote: >> >> It also happens that the Nicad simply does'nt work any more, >> >> no matter how long it's charged. If a day with external power >> >> connected does'nt resurrect it, I'd be opening it up to inspect; >> >> hopefully it has'nt leaked caustic goo all over the PCB, yet... >> >> ... >> >> >> >> On 3/13/17, Gregory McGill <[email protected]> wrote: >> > thanks! I've never had any problem turning on my other 100 even after >> > sitting forever.. I adjusted the contrast to no avail.. I'll leave >> them >> > powered a while >> > >> > Greg >> > >> > On Mon, Mar 13, 2017 at 10:13 AM, John R. Hogerhuis <[email protected]> >> > wrote: >> > >> >> The m100 and t102 have an internal nicad which must be on and charged. >> >> >> >> Turn the memory power switch on the bottom on, and leave the units >> >> plugged >> >> in for a while. Maybe overnight. >> >> >> >> There's also a contrast knob on the side that may need adjusting. >> >> >> >> This along with a "cold start" almost always works. >> >> >> >> -- John >> >> >> >> >> >> On Mon, Mar 13, 2017 at 10:10 AM Gregory McGill < >> [email protected]> >> >> wrote: >> >> >> >>> I just picked up one of each, they were working before shipping to me >> >>> (seller showed me pictures) but when I try batteries and DC power >> >>> wallwart(from my other working 100) neither do anything. >> >>> >> >>> >> >>> Is there a good flowchart/troubleshooting guide? >> >>> >> >>> Greg >> >>> >> >> >> > >> >> >> >> >>
