Turn it on <enter> BEEP<enter>
On Wed, Mar 15, 2017 at 10:14 AM Gregory McGill <[email protected]> wrote: > So the 100's been plugged in for day, also left it on battery power over > night with nvram on both times.. zero response.. tried cold start > > Greg > > On Mon, Mar 13, 2017 at 11:30 PM, Daryn Hanright <[email protected]> wrote: > > Cool you got the 102 going Greg. Love the Tandy 102 > > > On Mar 14, 2017 5:50 PM, "Gregory McGill" <[email protected]> wrote: > > That brought the 102 to life, 100 not so much.. will leave it on external > power and see. > > Greg > > On Mon, Mar 13, 2017 at 6:36 PM, John Gardner <[email protected]> wrote: > > It also happens that the Nicad simply does'nt work any more, > > no matter how long it's charged. If a day with external power > > connected does'nt resurrect it, I'd be opening it up to inspect; > > hopefully it has'nt leaked caustic goo all over the PCB, yet... > > ... > > > > On 3/13/17, Gregory McGill <[email protected]> wrote: > > thanks! I've never had any problem turning on my other 100 even after > > sitting forever.. I adjusted the contrast to no avail.. I'll leave > them > > powered a while > > > > Greg > > > > On Mon, Mar 13, 2017 at 10:13 AM, John R. Hogerhuis <[email protected]> > > wrote: > > > >> The m100 and t102 have an internal nicad which must be on and charged. > >> > >> Turn the memory power switch on the bottom on, and leave the units > >> plugged > >> in for a while. Maybe overnight. > >> > >> There's also a contrast knob on the side that may need adjusting. > >> > >> This along with a "cold start" almost always works. > >> > >> -- John > >> > >> > >> On Mon, Mar 13, 2017 at 10:10 AM Gregory McGill < > [email protected]> > >> wrote: > >> > >>> I just picked up one of each, they were working before shipping to me > >>> (seller showed me pictures) but when I try batteries and DC power > >>> wallwart(from my other working 100) neither do anything. > >>> > >>> > >>> Is there a good flowchart/troubleshooting guide? > >>> > >>> Greg > >>> > >> > > > > > > >
