Sad Trombone. I replaced the internal NiCd in my 8201A that was DOA from eBay, but I have been unable to elicit any sign of life from it. The NiCd was definitely garbage, with almost no current output and a fair amount of green crud on the positive side, and I believe my replacement was done well enough. I checked that I had the polarity right and that I hadn't shorted any of the nearby traces with my ham-fisted soldering. Given that the new NiCd already had a strong voltage, I doubt it needs to be charged, but I have it hooked up to the wall-wart just in case. Does anyone have any suggestions? -Jason
On Wed, Jul 5, 2017 at 12:29 PM, Josh Malone <[email protected]> wrote: > The link i sent is correct for m100. The NEC im not sure about but > presumably you can verify that. > > On Jul 5, 2017 12:11 PM, "Jason Benson" <[email protected]> wrote: > >> Does the M100 use the same type of battery? Since I'm ordering two I >> figured I might was well replace the old NiCd in my M100 as well. >> >> On Wed, Jul 5, 2017 at 10:28 AM, Josh Malone <[email protected]> >> wrote: >> >>> I was going to suggest this item: >>> >>> http://www.ebay.com/itm/2-pcs-60mAh-3-6V-Ni-CD-Button-Cell-R >>> echargeable-Battery-with-tab-US-Stock-/131976578753 >>> >>> On Wed, Jul 5, 2017 at 9:57 AM, Ken Pettit <[email protected]> wrote: >>> >>>> Actually, that is the wrong battery. Looks right, but I noticed it has >>>> 3 pins instead of 2. >>>> >>>> Ken >>>> >>>> >>>> On 7/5/17 6:56 AM, Ken Pettit wrote: >>>> >>>> Hi Jason, >>>> >>>> No, I haven't really had any time to devote to Club1000 with my job and >>>> my 5 and 3 yr old keeping me busy. Purchase this battery from Jameco: >>>> >>>> http://www.jameco.com/webapp/wcs/stores/servlet/ProductDispl >>>> ay?refineValue=Ni-MH&refineType=1&langId=-1&position=1&produ >>>> ctId=2129342&refine=1&catalogId=10001&history=xl5e0svk% >>>> 7CsubCategoryName%7EBatteries%5Erdtvalue%7EBatteries%5Erdtty >>>> pe%7Ec%5Ecategory%7E47%5EcategoryName%7Ecategory_root% >>>> 5EprodPage%7E15%5Epage%7ESEARCH%252BNAV&sub_attr_name= >>>> Chemistry&storeId=10001&ddkey=http%3AStoreCatalogDrillDownView >>>> >>>> Ken >>>> >>>> On 7/5/17 6:09 AM, Jason Benson wrote: >>>> >>>> Does the store at Club100 still take orders? I've been trying to order >>>> a replacement for the internal NiCd in my 8201A, but I've had no responses >>>> to my attempted Paypal orders. Failing that, does anyone know where I could >>>> get one? >>>> >>>> I got my 8201A off ebay, and it worked when I first started it, but as >>>> soon as I tried to save a file it died and I have not had any sign of life >>>> from it since. I tried leaving it plugged in for several days with a fresh >>>> set of batteries per the advice of some folks here to see if I could revive >>>> the NiCd (the suspected culprit), but this had no effect. >>>> -Jason >>>> >>>> >>>> >>>> >>> >>
