Have you tried sliding the "BACKUP POWER" switch on the bottom off and on several times? It could be that the little slider switch is misbehaving and isn't actually closing the circuit at the moment.
On Fri, Jul 14, 2017 at 10:56 AM, Jason Benson <[email protected]> wrote: > Sad Trombone. I replaced the internal NiCd in my 8201A that was DOA from > eBay, but I have been unable to elicit any sign of life from it. The NiCd > was definitely garbage, with almost no current output and a fair amount of > green crud on the positive side, and I believe my replacement was done well > enough. I checked that I had the polarity right and that I hadn't shorted > any of the nearby traces with my ham-fisted soldering. > Given that the new NiCd already had a strong voltage, I doubt it needs to > be charged, but I have it hooked up to the wall-wart just in case. Does > anyone have any suggestions? > -Jason > > On Wed, Jul 5, 2017 at 12:29 PM, Josh Malone <[email protected]> > wrote: > >> The link i sent is correct for m100. The NEC im not sure about but >> presumably you can verify that. >> >> On Jul 5, 2017 12:11 PM, "Jason Benson" <[email protected]> >> wrote: >> >>> Does the M100 use the same type of battery? Since I'm ordering two I >>> figured I might was well replace the old NiCd in my M100 as well. >>> >>> On Wed, Jul 5, 2017 at 10:28 AM, Josh Malone <[email protected]> >>> wrote: >>> >>>> I was going to suggest this item: >>>> >>>> http://www.ebay.com/itm/2-pcs-60mAh-3-6V-Ni-CD-Button-Cell-R >>>> echargeable-Battery-with-tab-US-Stock-/131976578753 >>>> >>>> On Wed, Jul 5, 2017 at 9:57 AM, Ken Pettit <[email protected]> wrote: >>>> >>>>> Actually, that is the wrong battery. Looks right, but I noticed it >>>>> has 3 pins instead of 2. >>>>> >>>>> Ken >>>>> >>>>> >>>>> On 7/5/17 6:56 AM, Ken Pettit wrote: >>>>> >>>>> Hi Jason, >>>>> >>>>> No, I haven't really had any time to devote to Club1000 with my job >>>>> and my 5 and 3 yr old keeping me busy. Purchase this battery from Jameco: >>>>> >>>>> http://www.jameco.com/webapp/wcs/stores/servlet/ProductDispl >>>>> ay?refineValue=Ni-MH&refineType=1&langId=-1&position=1&produ >>>>> ctId=2129342&refine=1&catalogId=10001&history=xl5e0svk%7Csub >>>>> CategoryName%7EBatteries%5Erdtvalue%7EBatteries%5Erdttype% >>>>> 7Ec%5Ecategory%7E47%5EcategoryName%7Ecategory_root%5EprodPag >>>>> e%7E15%5Epage%7ESEARCH%252BNAV&sub_attr_name=Chemistr >>>>> y&storeId=10001&ddkey=http%3AStoreCatalogDrillDownView >>>>> >>>>> Ken >>>>> >>>>> On 7/5/17 6:09 AM, Jason Benson wrote: >>>>> >>>>> Does the store at Club100 still take orders? I've been trying to order >>>>> a replacement for the internal NiCd in my 8201A, but I've had no responses >>>>> to my attempted Paypal orders. Failing that, does anyone know where I >>>>> could >>>>> get one? >>>>> >>>>> I got my 8201A off ebay, and it worked when I first started it, but as >>>>> soon as I tried to save a file it died and I have not had any sign of life >>>>> from it since. I tried leaving it plugged in for several days with a fresh >>>>> set of batteries per the advice of some folks here to see if I could >>>>> revive >>>>> the NiCd (the suspected culprit), but this had no effect. >>>>> -Jason >>>>> >>>>> >>>>> >>>>> >>>> >>> >
