Well, darn it, I thought I had succeeded, again. I got a M ->F null modem cable, and hooked it between the usb to serial cable and the db9 to db25 cable. TS DOS on my model 100 will show the directory on the host. Then when you try to download something, it says; no disk in drive. Then it turns out the the file is in the m100's directory, but either it is empty or it is fill of pages of "^@" with the wrong file at the end. I can upload most of the time, though. So close, and yet so far. I understand that I should not have to make my own adaptor, but if I do, then I will know that it is right, and the problem is something else. BTW I am back to using the "prolific" serial to usb cable, the consensus seems to be that that part does not matter.
On 11 January 2018 at 07:45, Kurt McCullum <[email protected]> wrote: > There is a pinout in the mComm manual in the members file area of > Club100.org. It is under my name. Brian has tested a number of off the shelf > cables and found several that work. But if you want the pinout, check the > manual I put together. > > Kurt McCullum > > > On Wednesday, January 10, 2018 3:48 PM, Peter Vollan <[email protected]> > wrote: > > > Where can I find a diagram of the correct null modem connection for > the Model 100? I may make one myself to be sure to get it right. > >
