I didn’t know the cable was different for a 102. The one I have is supposed to work for a 100/102/200.
I realized you had a 102 when I saw your break key was on the left. Mine is more towards the middle. You have to contort yourself like a Hindu goddess to press the CNTL, BREAK and RESET keys at the same time to cold boot. Other than that, those are the steps I’ve been following. No luck. Randy > On Jan 27, 2018, at 3:02 AM, Brian White <[email protected]> wrote: > > Sorry I forgot to point out I was using a 102 not a 100! > > I do have a 100 and a cable for 100, but the steps and behavior are all > exactly the same. > > > > On Jan 27, 2018 1:25 AM, "Randall Kindig" <[email protected] > <mailto:[email protected]>> wrote: > hey, Brian, > > thanks for the video. > > The very first thing I noticed is that you plugged your cable into the RS-232 > port of your T102. > > My cable has a chip on the end that plugs into the area next to the option > ROM. All the manuals that I’ve seen say that’s supposed to be the way it > works. > > Where did you get your cable? Do you have a copy of your manual? > > Randy > > > >> On Jan 27, 2018, at 12:44 AM, Brian White <[email protected] >> <mailto:[email protected]>> wrote: >> >> Resend because on my end at least it put it in spam... >> >> https://youtu.be/Mt6AmyLKkXQ <https://youtu.be/Mt6AmyLKkXQ> >> >> Sorry you can't read the screens and I blather too much. But it shows the >> full working procedure, so you can satisfy yourself that we aren't doing >> anything different from each other. >> >> -- >> bkw >
