thanks! i'll keep trying with the cable i have because i have that much time in my hands, but it's good to have options.
Sent from Yahoo Mail on Android On Fri, Aug 30, 2019 at 8:47 PM, Josh Malone<[email protected]> wrote: The Sabrent FTDI cable linked from tandy.wiki page is EOL, but it seems to have a identical replacement: https://www.amazon.com/Sabrent-Serial-Adapter-Chipset-CB-FTDI/dp/B006AA04K0/ If your Android device supports USB-on-the-go, it will work with this cable, despite the manufacturer not stating Android support. The driver is built in to android 6 (I think) and above, so basically everything. mComm android has TPDD mode and modem mode. In modem mode, it acts just like a hayes modem but dials IP addresses. Basically, the same as most WiFi-232 devices. I use it and will be demoing it at Tandy Assembly in September. -Josh On Fri, Aug 30, 2019 at 9:41 PM Mike Warns <[email protected]> wrote: > > The USB to Serial adapter lacks drivers for Android. I have an email in > asking if it will even work with Android. > > The mComm instructions are unclear. While futzing around I managed to get > TERM to stop beeping at me but I don't know if the adapter will work lacking > assurance that it CAN work. Does mComm do stuff besides emulate a TDD? I > got a similar rig working on my now-broken Win7 netbook because I can work > with Hyperterminal in my sleep, but I need this to work on what I have here > in the rehab home. > > Sent from Yahoo Mail on Android > > On Fri, Aug 30, 2019 at 1:41 PM, Josh Malone > <[email protected]> wrote: > You can install mComm on android > > http://www.club100.org/memfiles/index.php?&direction=1ℴ=mod&directory=Kurt%20McCullum/mComm%20Android > > and use a USB-on-the-go cable to connect a USB-to-serial cable > > http://tandy.wiki/Model_100_102_200_600_Serial_Cable > > On Fri, Aug 30, 2019 at 2:17 PM Mike Warns <[email protected]> wrote: > > > > In between will be a DB25M to DB9F null modem cable and a DB9M to USB > > adapter. > > > >
