Small nitpick: it has a ch3/4 RF TV output as well as the composite out. And of course the cable for the M100 is different from the 102/200. I believe there are sources on here for both the cable and the disk.
Have fun! ----- Original Message ----- From: Gregory McGill To: [email protected] Sent: Friday, January 17, 2020 5:54 PM Subject: Re: [M100] Request for info on RS DV Interface http://ftp.whtech.com/club100/doc/dvi.pdf It works with the 100, 102 and 200, it provides a video screen (composite out) and disk drive, it requires specific os to be loaded off disk then it uploads a patched basic (basically) to use the display I have disks, cables etc here https://www.arcadeshopper.com/wp/?page_id=11#!/100-102-200/c/28313042/offset=0&sort=nameAsc Greg On Fri, Jan 17, 2020 at 2:38 PM Charles Hudson <[email protected]> wrote: I just acquired a Radio Shack disk video interface; I haven't plugged it in yet and it came with no documentation. It does have a port on the bottom - looks like a ribbon cable - and a couple of RCA jacks on the back, so there is a way in and a way out, but I don' know what it was designed to interface with. Maybe the M100? I think however that some of the community have these in their collection. I'd appreciate any guidance you can give me. Specs? Manual? Thanks for your replies. -CH-
