Looks like a garden variety linear 12 and 5 V supply; a 3 Amp each switcher
should be able to replace it.
----- Original Message -----
From: James Zeun
To: m...@bitchin100.com
Sent: Saturday, January 18, 2020 6:22 PM
Subject: Re: [M100] Request for info on RS DV Interface
If I didn't want to use a step down. Would it take much to replace the
internal PSU with something else?
Someone will have to educate me on the inner workings as I dont know anything
about the inside of a DV interface.
Surely it doesn't actually need 1000w??? That seems just a bit excessive.
On Sat, 18 Jan 2020, 10:30 pm Gary Hammond, <ghamm...@hotmail.com> wrote:
I ended up buying a stepdown transformer for mine. If you get a US
powerboard to plug into the transformer, you can also use the US plug packs
plus I have a US printer that I plug into the transformer as well. It's a beefy
1000W transformer so can handle the load. You shouldn't need something this big
if you are powering just the DVI.
-----Original Message-----
From: M100 <m100-boun...@lists.bitchin100.com> On Behalf Of james
Sent: Sunday, 19 January 2020 11:08 AM
To: m...@bitchin100.com
Subject: Re: [M100] Request for info on RS DV Interface
Hey everyone
I have a DV related question
It's now looking like I might very well be getting my own, however as the
unit is coming from the States and I live in England. It raises the question of
power, we use 240v here and I was wondering if i'm going to need to modify the
unit or buy some sort of step down.
Cheers
James
