Yah cpm already supports sending serial characters for video out the rs232 port or the BCR port mod I posted at the wiki. That's my preferred way of using CP/M.
Already done;) On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: > I wasn't so much thinking of the M100 mode driver... just having the > ability to output the CPM console to the serial port is enough for me. > > if it can do that... I'm definitely going to try to find a good T-100 and > set up RexCPM. (I want to keep my 102 intact, if I can.) > > Tom Wilson > [email protected] > (619)940-6311 > K6ABZ > > > On Mon, Sep 14, 2020 at 5:46 PM Stephen Adolph <[email protected]> > wrote: > >> Hi Tom, >> Actually... my major work item is to fuse the two projects. Still not >> done but j have the basics thought through. >> >> Just to make sure I am on the same page... >> >> With REXCPM users can switch to CPM and use the VT100 board to use 80x24 >> display. >> However in M100 mode you cant. So REXCPM should include the VT100 driver >> function so one can use 80x24 for both M100 and CPM. >> >> Is that what you mean? >> >> >> On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: >> >>> Stephen, I've been following the progress of RexCPM and the >>> terminal-based "DVI". >>> >>> Does RexCPM let us use a terminal as display for the computer? If I >>> could use RexCPM with the VT terminal, that would be a killer use case for >>> this machine! >>> >>> >>> >>> Tom Wilson >>> [email protected] >>> (619)940-6311 >>> K6ABZ >>> >>
