sweeeet. Now I just need to find a nice model 100. Just so I'm not being an idiot... RexCPM works without soldering on the 100, but does require soldering or cutting traces on the 102, right?
Tom Wilson [email protected] (619)940-6311 K6ABZ On Mon, Sep 14, 2020 at 6:25 PM Stephen Adolph <[email protected]> wrote: > Yah cpm already supports sending serial characters for video out the rs232 > port or the BCR port mod I posted at the wiki. > That's my preferred way of using CP/M. > > Already done;) > > > On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: > >> I wasn't so much thinking of the M100 mode driver... just having the >> ability to output the CPM console to the serial port is enough for me. >> >> if it can do that... I'm definitely going to try to find a good T-100 and >> set up RexCPM. (I want to keep my 102 intact, if I can.) >> >> Tom Wilson >> [email protected] >> (619)940-6311 >> K6ABZ >> >> >> On Mon, Sep 14, 2020 at 5:46 PM Stephen Adolph <[email protected]> >> wrote: >> >>> Hi Tom, >>> Actually... my major work item is to fuse the two projects. Still not >>> done but j have the basics thought through. >>> >>> Just to make sure I am on the same page... >>> >>> With REXCPM users can switch to CPM and use the VT100 board to use 80x24 >>> display. >>> However in M100 mode you cant. So REXCPM should include the VT100 >>> driver function so one can use 80x24 for both M100 and CPM. >>> >>> Is that what you mean? >>> >>> >>> On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: >>> >>>> Stephen, I've been following the progress of RexCPM and the >>>> terminal-based "DVI". >>>> >>>> Does RexCPM let us use a terminal as display for the computer? If I >>>> could use RexCPM with the VT terminal, that would be a killer use case for >>>> this machine! >>>> >>>> >>>> >>>> Tom Wilson >>>> [email protected] >>>> (619)940-6311 >>>> K6ABZ >>>> >>>
