Plug and play in M100, one wire to solder in T102.
On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: > sweeeet. Now I just need to find a nice model 100. > > Just so I'm not being an idiot... RexCPM works without soldering on the > 100, but does require soldering or cutting traces on the 102, right? > > > Tom Wilson > [email protected] > (619)940-6311 > K6ABZ > > > On Mon, Sep 14, 2020 at 6:25 PM Stephen Adolph <[email protected]> > wrote: > >> Yah cpm already supports sending serial characters for video out the >> rs232 port or the BCR port mod I posted at the wiki. >> That's my preferred way of using CP/M. >> >> Already done;) >> >> >> On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: >> >>> I wasn't so much thinking of the M100 mode driver... just having the >>> ability to output the CPM console to the serial port is enough for me. >>> >>> if it can do that... I'm definitely going to try to find a good T-100 >>> and set up RexCPM. (I want to keep my 102 intact, if I can.) >>> >>> Tom Wilson >>> [email protected] >>> (619)940-6311 >>> K6ABZ >>> >>> >>> On Mon, Sep 14, 2020 at 5:46 PM Stephen Adolph <[email protected]> >>> wrote: >>> >>>> Hi Tom, >>>> Actually... my major work item is to fuse the two projects. Still not >>>> done but j have the basics thought through. >>>> >>>> Just to make sure I am on the same page... >>>> >>>> With REXCPM users can switch to CPM and use the VT100 board to use >>>> 80x24 display. >>>> However in M100 mode you cant. So REXCPM should include the VT100 >>>> driver function so one can use 80x24 for both M100 and CPM. >>>> >>>> Is that what you mean? >>>> >>>> >>>> On Monday, September 14, 2020, Tom Wilson <[email protected]> wrote: >>>> >>>>> Stephen, I've been following the progress of RexCPM and the >>>>> terminal-based "DVI". >>>>> >>>>> Does RexCPM let us use a terminal as display for the computer? If I >>>>> could use RexCPM with the VT terminal, that would be a killer use case for >>>>> this machine! >>>>> >>>>> >>>>> >>>>> Tom Wilson >>>>> [email protected] >>>>> (619)940-6311 >>>>> K6ABZ >>>>> >>>>
