TPDD1 or 2? I ask because I've done quite a bit of work with a TPDD2. The TPDD Client software that I wrote will drive a TPDD2 in both modes. It has the ability to read/write all the sectors on a disk to make a copy. Not sure if that helps you or not but thought I would mention it.
http://www.club100.org/memfiles/index.php?&direction=0&order=&directory=Kurt%20McCullum/TPDD%20Client Kurt On Fri, Jan 8, 2021, at 4:38 PM, Stephen Adolph wrote: > I did see that and tried it. no luck so far but I will keep plugging away. I > seem to recall this worked for me in the past. > > What I am trying to do is drive a real TPDD in FDC mode, and use VT to > observe the transactions. > > > On Fri, Jan 8, 2021 at 7:23 PM Ken Pettit <[email protected]> wrote: >> Hardware flow control? I think VT has a checkbox to ignore CTS / RTS. >> Did you try that? >> >> Ken >> >> On 1/8/21 4:19 PM, Stephen Adolph wrote: >> > Hey Folks, >> > I'm having some trouble getting bi-directional serial port working on >> > virtualT. >> > >> > * Windows 10 >> > * VT 1.7 (and also tried 1.6) >> > * using a real serial port COM 1, or also COM2 FTDI USB serial port >> > * Model T connected to COM1. >> > >> > I can send out from VirtualT no problem, but nothing seems to flow in >> > the return direction. >> > >> > I thought this worked.. struggling to understand why it is jammed up. >> > >> > On the same physical setup, if I kill VirtualT and start TeraTerm >> > instead, it works bi-directionally no problem. >> > >> > I may try Linux next. >> > >> > thx >> > Steve >>
