I did a video a while ago about the subject of cleaning up after alkaline 
battery leaks. You can use vinegar or citric acid. If you mix a small amount of 
vegetable glycerin with the vinegar/citric acid makes it thick enough to stay 
in place so you can just dab in on the spot where it is needed.

 

 <https://youtu.be/ZPvLnfbwWDU> https://youtu.be/ZPvLnfbwWDU

 

Jeff Birt

 

 

From: M100 <[email protected]> On Behalf Of AvantGuard Systems
Sent: Tuesday, February 9, 2021 3:03 PM
To: [email protected]
Subject: Re: [M100] Newbie

 

Thanks Ron,

 

I saw one post saying you can soak boards in a vinegar solution. Not sure I 
want to do that, but is that possible?

 

 Curtis 

 

On Tue, Feb 9, 2021 at 12:32 PM Ron Lauzon <[email protected] 
<mailto:[email protected]> > wrote:

Vinegar.  You will find many videos about cleaning up leaking batteries on 
YouTube.

 

This is a common problem with vintage computers.

 

 

-- 

Weblog: http://ronsapartment.blogspot.com/

 

TRS-80 Pocket Computer 2 - TRS-80 Pocket Computer 4 - TRS-80 Model 100/102 - 
Tandy 1100FD - Tandy 1400LT - Commodore 64 - TRS-80 Model 4P - Kaypro IV - 
Commodore PET

RC2014 (Mini, Zed and Pro) - Altair-Duino with TI Silent 700 - VT320 
terminal/Raspberry Pi 0

Some people like to work on old cars.  But old computers are cheaper and don't 
require a big garage.

 

 

 

Feb 9, 2021, 15:26 by [email protected] 
<mailto:[email protected]> :

Just joined the list as I just acquired a used TRS80 Model 100. Of course it's 
not working, so I just wanted to first ask for some advice. I have been reading 
info at Club100.

Basically, I feel I need to buy some stuff at Club100. First and foremost a new 
battery, which is highly recommended. Also expansion RAM (since none has been 
installed), probably the power supply (although maybe premature). But probably 
better cost wise to get everything right away (shipping costs!). 

Anyhow, opening it up though I see that this thing obviously had batteries left 
in it and there is dry acid (whatever that is) about that general area on the 
board. My concern is that that might be enough damage that there's no way to 
recover it. Or maybe cleaning that area up might be fine. What is recommended 
for cleaning up battery acid, btw.

Thanks for any suggestions!

 

 Curtis

 

Reply via email to