Hi, Seems like it's not an ov9650 sensor... Willem put online, some time ago, a small user-space C program that would determine the sensor type. That could be useful for you. Could you please browse the mailing-list's archive, I think you can find a link there..
Willy, are you sure that's a m5602 based webcam? Best regards, Ilyes Gouta. On Wed, Mar 12, 2008 at 1:54 PM, willy <[EMAIL PROTECTED]> wrote: > Ok, forcing sensor=1 I can load module m5602-ov9650-2. > > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602_v4l2.c: > m5602 open > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602_v4l2.c: > m5602 open > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602_v4l2.c: > m5602 open > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > usb_m5602_exit - WebCam driver shutdown > usbcore: deregistering interface driver m5602 > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > m5602 release resources video device 0 > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > m5602_disconnect- M560x-based WebCam disconnected > > Linux video capture interface: v2.00 > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > usb_m5602_init - WebCam driver startup > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > BisonCam webcam found. > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > Probing for an ov9650 sensor > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > I2C_BUSY, 0xc7 > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > Sensor reported as 0xff:0xff > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > Forcing an ov9650 sensor > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > If this works, please report your sensor product id: 0xff:0xff to > [email protected] > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > m5602_probe - m5602 WebCam driver is now controlling video device 0 > usbcore: registered new interface driver m5602 > > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c: > 0.1.0:M5602 Webcam Driver > > > But when I start livecam (640x480 rgb24) I can't get any image (Bison > Cam @ 0 fps). > > No errors in dmesg nor in syslog... > > Any ideas? > > > Il giorno mer, 12/03/2008 alle 10.55 +0100, Erik Andrén ha scritto: > > > > Hi Willy, > > > > 2008/3/12, willy <[EMAIL PROTECTED]>: > > Hi! > > I have already tried to load m5602-ov9650-2 modules > > but it doesn't > > detect the sensor. It says "no supported sensor found". > > > > Have you tried to insert the module with the force=1 parameter? > > > > If it works, please report your sensor id to this list. > > Also, make sure you test the cam with the livecam application, nothing > > else works for the moment AFAICT. > > > > Regards, > > Erik > > > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > M560x-driver-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ M560x-driver-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
