here my lsusb -v
Bus 005 Device 003: ID 0402:5602 ALi Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0402 ALi Corp.
idProduct 0x5602
bcdDevice 1.00
iManufacturer 0
iProduct 1
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 101
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1380 3x 896 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1300 3x 768 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
I'll search the program and then I'll post my sensor type....
many thanx
Il giorno mer, 12/03/2008 alle 14.15 +0100, Ilyes Gouta ha scritto:
> Hi,
>
> Seems like it's not an ov9650 sensor... Willem put online, some time
> ago, a small user-space C program that would determine the sensor
> type. That could be useful for you. Could you please browse the
> mailing-list's archive, I think you can find a link there..
>
> Willy, are you sure that's a m5602 based webcam?
>
> Best regards,
> Ilyes Gouta.
>
> On Wed, Mar 12, 2008 at 1:54 PM, willy <[EMAIL PROTECTED]> wrote:
> > Ok, forcing sensor=1 I can load module m5602-ov9650-2.
> >
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602_v4l2.c:
> > m5602 open
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602_v4l2.c:
> > m5602 open
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602_v4l2.c:
> > m5602 open
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > usb_m5602_exit - WebCam driver shutdown
> > usbcore: deregistering interface driver m5602
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > m5602 release resources video device 0
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > m5602_disconnect- M560x-based WebCam disconnected
> >
> > Linux video capture interface: v2.00
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > usb_m5602_init - WebCam driver startup
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > BisonCam webcam found.
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > Probing for an ov9650 sensor
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > I2C_BUSY, 0xc7
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > Sensor reported as 0xff:0xff
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > Forcing an ov9650 sensor
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > If this works, please report your sensor product id: 0xff:0xff to
> > [email protected]
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > m5602_probe - m5602 WebCam driver is now controlling video device 0
> > usbcore: registered new interface driver m5602
> >
> > /home/willy/software/pequeno/webcam/svn/m560x-driver/m560x/branches/m5602-ov9650-2/m5602.c:
> > 0.1.0:M5602 Webcam Driver
> >
> >
> > But when I start livecam (640x480 rgb24) I can't get any image (Bison
> > Cam @ 0 fps).
> >
> > No errors in dmesg nor in syslog...
> >
> > Any ideas?
> >
> >
> > Il giorno mer, 12/03/2008 alle 10.55 +0100, Erik Andrén ha scritto:
> >
> >
> > > Hi Willy,
> > >
> > > 2008/3/12, willy <[EMAIL PROTECTED]>:
> > > Hi!
> > > I have already tried to load m5602-ov9650-2 modules
> > > but it doesn't
> > > detect the sensor. It says "no supported sensor found".
> > >
> > > Have you tried to insert the module with the force=1 parameter?
> > >
> > > If it works, please report your sensor id to this list.
> > > Also, make sure you test the cam with the livecam application, nothing
> > > else works for the moment AFAICT.
> > >
> > > Regards,
> > > Erik
> > >
> >
> >
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > M560x-driver-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
> >
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
M560x-driver-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
