2008/9/9 Jonee Ryan Ty <[EMAIL PROTECTED]>
>
> I was able to compile the branch and modprobed successfully (that's make
> then make load). i also set the needed variables by the libv4l.
>
> [ 110.735250]
> /home/jonee/m560x-driver/m560x/branches/m5602-ov7640/m5602.c: m5602 Webcam
> driver startup
> [ 110.735579]
> /home/jonee/m560x-driver/m560x/branches/m5602-ov7640/m5602.c: BisonCam
> webcam found
> [ 110.804761]
> /home/jonee/m560x-driver/m560x/branches/m5602-ov7640/m5602.c: m5602 WebCam
> driver is now controlling video device 0
> [ 110.804787] usbcore: registered new interface driver m5602
> [ 110.804792]
> /home/jonee/m560x-driver/m560x/branches/m5602-ov7640/m5602.c: 0.3.0:M5602
> Webcam Driver
>
> started livecam with 640x480 bayer mode but no image was shown. i even have
> to kill the process.
>
> [ 166.123322]
> /home/jonee/m560x-driver/m560x/branches/m5602-ov7640/m5602_v4l2.c: BisonCam
> on /dev/video0 opened
> [ 354.612356]
> /home/jonee/m560x-driver/m560x/branches/m5602-ov7640/m5602_v4l2.c: BisonCam
> /dev/video0 closed
>
>
> i am using cheese version 2.22.3-0ubuntu1 and when i take a photo it
> crashes after counting down and emits the previous two lines as well.
>
Hi,
at this stage you must use livecam (livecam.sf.net) and nothing else. We
need to adjust the hsync and vsync values in order to get a stable picture.
You don't need libv4l as we're only going to use the raw bayer format.
Regards,
Erik
>
>
> --- On Tue, 9/9/08, Erik Andrén <[EMAIL PROTECTED]> wrote:
>
> > From: Erik Andrén <[EMAIL PROTECTED]>
> > Subject: m5602-ov7640 branch created
> > To: "Jonee Ryan Ty" <[EMAIL PROTECTED]>
> > Cc: "m560x-driver-devel" <[email protected]>
> > Date: Tuesday, 9 September, 2008, 2:05 AM
> > Hi,
> > I've now created a driver for your sensor.
> > Unfortunately, it won't work without some work on your
> > side.
> >
> > This is what you need to do:
> > 1. Check out the new branch m5602-ov7640, build it and make
> > sure it
> > modprobes correctly.
> > 2. Download and build livecam. (Which can be found at
> > http://livecam.sf.net).
> > 3. Ensure that you have good lighting conditions
> > 4. Start livecam and select the 640x480 Bayer mode. The
> > image is most likely
> > very distorted. In the toolbar, you have a debug option,
> > select it and
> > choose the adjust pitch. Try to adjust the pitch so that
> > you get a proper
> > image. Please report if you're able to achieve this
> > also, if possible,
> > attach a screenshot.
> >
> > Thanks,
> > Erik
>
>
> Get your new Email address!
> Grab the Email name you've always wanted before someone else does!
> http://mail.promotions.yahoo.com/newdomains/ph/
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
M560x-driver-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
