On 13/02/17 16:06, Mark Wenning wrote: > R630 is definitely a supported server. > Look like it autodetected OK, if you have those settings in the GUI. > One quick thing you might want to check is in the iDRAC -> Network > Settings, scroll near the bottom and make sure that "IPMI Over LAN" is > enabled. > When you tell it to commission, do you see the R630 power on? You > should also be able to click "Check Power" at the top of the GUI page > and see it change to green Power On after a few seconds.
Try using ipmipower from the freeipmi-tools package to check power on the BMC: ipmipower -u maas -p <password-for-bmc-in-maas> -h ip-of-bmc -s The rack controller (not the region controller) talks to the BMC. So watch the rackd.log not the regiond.log as I suspect useful things will show up there. Also, you need to have a route from the rack controller to the BMC. If your BMC is on a network that the rack controller cannot reach, that can cause these issues. Mark
-- Maas-devel mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/maas-devel
