Hey Jim, Cool. I do not know any way to automagically enable IPMI over LAN, I do it by hand when I set up a new machine. There may be a way to do it with Dell OMSA.
Mark Wenning Technical Partner Manager, Cloud Alliances Canonical, Ltd [email protected] ----- “Always code as if the guy who ends up maintaining your code will be a violent psychopath who knows where you live” -- John Woods On Mon, Feb 13, 2017 at 10:58 AM, Jim Tilander <[email protected]> wrote: > Hi Mark, > > The "IPMI over LAN" was not checked, you were correct. Thanks for pointing > this out to me! After adding this, everything worked like a charm. Is there > a way to auto enable this setting, or do we have to go into each machine > and check this checkbox? > > Cheers, > Jim > > On Feb 13, 2017, at 8:06 AM, Mark Wenning <[email protected]> > wrote: > > R630 is definitely a supported server. > Look like it autodetected OK, if you have those settings in the GUI. One > quick thing you might want to check is in the iDRAC -> Network Settings, > scroll near the bottom and make sure that "IPMI Over LAN" is enabled. > When you tell it to commission, do you see the R630 power on? You should > also be able to click "Check Power" at the top of the GUI page and see it > change to green Power On after a few seconds. > > > > > Mark Wenning > Technical Partner Manager, Cloud Alliances > Canonical, Ltd > [email protected] > ----- > “Always code as if the guy who ends up maintaining your code will be a > violent psychopath who knows where you live” -- John Woods > > > On Mon, Feb 13, 2017 at 9:50 AM, Jim Tilander <[email protected]> wrote: > >> Hi, >> >> >> I’ve got a Dell R630 server (brand new) that I’m trying to commission. I >> managed to get the server up and PXE booting so that it got discovered. So >> I’m trying to change the state from “New” -> “Commissioned”, at which it >> fails to contact the BMC for power status. >> >> I noticed that the initial discovery correctly seems to have made a new >> account “maas” in iDRAC and detected the correct IP address. >> >> The auto detected settings are: >> >> IPMI >> LAN_2_0 [IPMI 2.0] >> <correct ip> >> maas >> ******** >> >> >> I’ve also verified that the account looks good in iDRAC. >> >> >> Both /var/log/maas/maas.log and /var/log/maas/regiond.log seems to not >> contain any useful messages related to IPMI. Am I looking in the right >> locations? Any ideas what might be not working? I figured that the R630 are >> “supported” servers? >> >> Cheers, >> Jim >> >> >> -- >> Maas-devel mailing list >> [email protected] >> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm >> an/listinfo/maas-devel >> >> > >
-- Maas-devel mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/maas-devel
