Hey Mark and Jim, Enabling IPMI over LAN (and anything else iDRAC related) is pretty straightforward if you use racadm. Check out the link below.
http://www.dell.com/support/manuals/no/no/nobsdt1/dell-idrac-service-module-2.0/idrac8_ug_pub-v1/Configuring-IPMI-Over-LAN-Using-RACADM?guid=GUID-B5132B9F-5DF3-400C-AE33-FA5DA7D66B6A&lang=en-us -- Sandor Zeestraten On Mon, Feb 13, 2017 at 6:19 PM, Mark Wenning <[email protected]> wrote: > Hey Jim, > Cool. I do not know any way to automagically enable IPMI over LAN, I do > it by hand when I set up a new machine. There may be a way to do it with > Dell OMSA. > > Mark Wenning > Technical Partner Manager, Cloud Alliances > Canonical, Ltd > [email protected] > ----- > “Always code as if the guy who ends up maintaining your code will be a > violent psychopath who knows where you live” -- John Woods > > > On Mon, Feb 13, 2017 at 10:58 AM, Jim Tilander <[email protected]> wrote: > >> Hi Mark, >> >> The "IPMI over LAN" was not checked, you were correct. Thanks for >> pointing this out to me! After adding this, everything worked like a charm. >> Is there a way to auto enable this setting, or do we have to go into each >> machine and check this checkbox? >> >> Cheers, >> Jim >> >> On Feb 13, 2017, at 8:06 AM, Mark Wenning <[email protected]> >> wrote: >> >> R630 is definitely a supported server. >> Look like it autodetected OK, if you have those settings in the GUI. >> One quick thing you might want to check is in the iDRAC -> Network >> Settings, scroll near the bottom and make sure that "IPMI Over LAN" is >> enabled. >> When you tell it to commission, do you see the R630 power on? You >> should also be able to click "Check Power" at the top of the GUI page and >> see it change to green Power On after a few seconds. >> >> >> >> >> Mark Wenning >> Technical Partner Manager, Cloud Alliances >> Canonical, Ltd >> [email protected] >> ----- >> “Always code as if the guy who ends up maintaining your code will be a >> violent psychopath who knows where you live” -- John Woods >> >> >> On Mon, Feb 13, 2017 at 9:50 AM, Jim Tilander <[email protected]> wrote: >> >>> Hi, >>> >>> >>> I’ve got a Dell R630 server (brand new) that I’m trying to commission. I >>> managed to get the server up and PXE booting so that it got discovered. So >>> I’m trying to change the state from “New” -> “Commissioned”, at which it >>> fails to contact the BMC for power status. >>> >>> I noticed that the initial discovery correctly seems to have made a new >>> account “maas” in iDRAC and detected the correct IP address. >>> >>> The auto detected settings are: >>> >>> IPMI >>> LAN_2_0 [IPMI 2.0] >>> <correct ip> >>> maas >>> ******** >>> >>> >>> I’ve also verified that the account looks good in iDRAC. >>> >>> >>> Both /var/log/maas/maas.log and /var/log/maas/regiond.log seems to not >>> contain any useful messages related to IPMI. Am I looking in the right >>> locations? Any ideas what might be not working? I figured that the R630 are >>> “supported” servers? >>> >>> Cheers, >>> Jim >>> >>> >>> -- >>> Maas-devel mailing list >>> [email protected] >>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm >>> an/listinfo/maas-devel >>> >>> >> >> > > -- > Maas-devel mailing list > [email protected] > Modify settings or unsubscribe at: https://lists.ubuntu.com/ > mailman/listinfo/maas-devel > >
-- Maas-devel mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/maas-devel
