Yeah tha'ts what eric suggested as well. it work s and works very well along wiht the fix that the 2 pieces of software do.
Take care. On Aug 26, 2014, at 6:19 PM, gs <[email protected]> wrote: > Actually, something like the below was posted quite a while back on one list > or the other. Unfortunately, while it does eliminate part of the problem, it > does not completely address it. > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Scott Erichsen > Sent: Tuesday, August 26, 2014 2:14 PM > To: [email protected] > Subject: RE: insert key remapping not working on right side of the keyboard > under Fusion ... > > Hi Jeff, > > Through some trial and error with JFW in Fusion, I found a couple interesting > things when working on a Mac keyboard with no number pad. > > What I found was that when in Windows in Fusion, turn on keyboard help with > Capslock+1 on the number row so you can play. > > FN+semicolon, This should activate the JAWS cursor. > FN+slash This will activate the PC cursor. > FN +CapsLock+semicolon This is the route PC to JAWS > FN +CapsLock+slash This will route Jaws to PC > > Experiment with FN + the keys on the righthand side of the keyboard . What > is happening is that the FN key + the keys on the righthand side of the > keyboard are acting as a numpad. So, you can also find the combos to right > and left click and page up/pagedown just like on the numpad. > > I do find this to be a pain and will take some getting used too, but, it does > work. > > Try it out and good luck. > > Hope this helps. > > Scott > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Jeff Bishop > Sent: Wednesday, 27 August 2014 5:20 AM > To: [email protected] > Subject: RE: insert key remapping not working on right side of the keyboard > under Fusion ... > > I am not using SharpKeys to remap the capslock key though. > > From: [email protected] > [mailto:[email protected]] On Behalf Of Chris Moore > Sent: Tuesday, August 26, 2014 12:13 PM > To: [email protected] > Subject: Re: insert key remapping not working on right side of the keyboard > under Fusion ... > > Jeff, > If you’re running Seil, you don’t need sharp keys. Seil can remap the caps > lock key to the insert key. Carabiner also gives you a numeric keypad which > you can access using the fn plus the keys on the right side (7 8 9 u i o j k > l m / ; p 0). > > Chris > On Aug 26, 2014, at 1:24 PM, Jeff Bishop <[email protected]> wrote: > > > Hello Everyone, > > OK, this is a very strange one and I am hoping someone can lend some advice > here. > > I have a MacBook Pro running Fusion. I use Seil and Karabiner to remap my > caps lock key to the Insert key. I use SharpKeys to flip my alt and window > key mappings and all of this is working as I expect, with one exception… > > I normally use a full sized Apple keyboard while at the office with a numeric > keypad on the right. So, this means that the caps lock key doesn’t play a > role here for the most part and everything works well for me using the JAWS > desktop layout. > > I have found that if I use the insert key on the numeric keypad or the caps > lock key while in Laptop mode that none of the keys past the J key work. > Meaning, I can do things like insert-t, caps lock plus s, etc., etc. but > anything on the right-hand side of the keyboard doesn’t work. > > Something interesting to note is that the laptop keys don’t work whether > using caps lock or the insert key on the numeric keypad past the letter J. > > Has anyone run into this issue at all? If so your advice is hugely > appreciated. > > I am wondering if the newer versions of Karabiner or Seil have broken > something here? > > Jeff > > > On Aug 26, 2014, at 2:16 PM, Sarah k Alawami <[email protected]> wrote: > > I think I got the 2 names slightly wrong but I've got a question on behalf of > my bf who is not on thsi list. > > He wants to remap the caps lock key to be used as a insert key. He followed > eric karon's directions, however for some reason cannot get it to work. Here > is his question in an audio boo > > https://audioboo.fm/boos/2422334-need-some-highly-technical-help-regarding-vmware-fusion-6-and-using-it-with-jaws > > I know this can be done on osx via these 2 pieces of software but how? I > have not done the process in about 3 years. if someone can tell me how and > I'll forward the answer on to him? > > Thanks. > <--- Mac Access At Mac Access Dot Net ---> > > To reply to this post, please address your message to > [email protected] > > You can find an archive of all messages posted to the Mac-Access forum at > the list's public Mail Archive: > <http://www.mail-archive.com/[email protected]/>. > Subscribe to the list's RSS feed from: > <http://www.mail-archive.com/[email protected]/maillist.xml> > > As the Mac Access Dot Net administrators, we always strive to ensure that the > Mac-Access E-Mal list remains malware, spyware, Trojan, virus and worm-free. > However, this should in no way replace your own security strategy. We assume > neither liability nor responsibility should something unpredictable happen. > > Please remember to update your membership preferences periodically by > visiting the list website at: > <http://mail.tft-bbs.co.uk/mailman/listinfo/mac-access/options/> > > <--- Mac Access At Mac Access Dot Net ---> > > To reply to this post, please address your message to > [email protected] > > You can find an archive of all messages posted to the Mac-Access forum at > the list's public Mail Archive: > <http://www.mail-archive.com/[email protected]/>. > Subscribe to the list's RSS feed from: > <http://www.mail-archive.com/[email protected]/maillist.xml> > > As the Mac Access Dot Net administrators, we always strive to ensure that the > Mac-Access E-Mal list remains malware, spyware, Trojan, virus and worm-free. > However, this should in no way replace your own security strategy. We assume > neither liability nor responsibility should something unpredictable happen. > > Please remember to update your membership preferences periodically by > visiting the list website at: > <http://mail.tft-bbs.co.uk/mailman/listinfo/mac-access/options/> <--- Mac Access At Mac Access Dot Net ---> To reply to this post, please address your message to [email protected] You can find an archive of all messages posted to the Mac-Access forum at the list's public Mail Archive: <http://www.mail-archive.com/[email protected]/>. Subscribe to the list's RSS feed from: <http://www.mail-archive.com/[email protected]/maillist.xml> As the Mac Access Dot Net administrators, we always strive to ensure that the Mac-Access E-Mal list remains malware, spyware, Trojan, virus and worm-free. However, this should in no way replace your own security strategy. We assume neither liability nor responsibility should something unpredictable happen. Please remember to update your membership preferences periodically by visiting the list website at: <http://mail.tft-bbs.co.uk/mailman/listinfo/mac-access/options/>
