Harry,

Update Photoshop Elements to version 2, install the twain drivers for OS X
and avoid running Classic at all costs.


Ward Oldham, MacDude
MacTown
1041 Bardstown Road
Louisville, KY  40204
502-485-1243
ward at mactown.us
http://www.mactown.us



> I just installed Epson Twain drivers on my ibook. I started the ibook in
> classic mode installed the drivers and had no problem twain acquiring
> documents/photos into photoshop elements when the computer was booted
> into 9.2. However when I rebooted into jaguar and ran elements in classic
> mode under Jaguar I got the messages as listed below.
> 
> Conclusion: There is a conflict with jaguar and Epson that prevents the
> scanner from being seen by applications running in classic.
> 
> Vuscan sees the scanner-no problem.
> 
> 
> Tuesday, January 21, 20033:37 PMJerry Yeagerjerry at browseryshop.com
> 
>> Does your Classic Install have the extensions copied/installed over
>>> from the older OS-9 folder?
>> Sometimes you have to re-install the extensions so that Classic knows
>> about them.
>> 
>> Jerry
>> 
>> p.s. You can also try VueScan as it has been known to work pretty well.
>> 
>> On Tuesday, January 21, 2003, at 11:07  AM, Harry Jacobson-Beyer wrote:
>> 
>>> As you know I updated my desktop G4 - 400 mghz to os x - 10.2.3
>>> 
>>> Prior to the upgrade I was able to use my scanner with Photoshop
>>> Elements -
>>> version 1 in classic (operating system 9.2.2). I could "Twain Acquire"
>>> images via the scanner with no problem. I could use the epson smart
>>> panel
>>> software in Classic and scan images also with no problem.
>>> 
>>> Since upgrading to OS X 10.2.3 I cannot access the scanner from within
>>> Classic. When I try I get the following messages:
>>> 
>>>             Cannot Find the Scanner on the Bus.
>>>             Please ensure that it is switched on, ready to
>>>             scan and that the cables are attached corectly.
>>> 
>>> I click OK and get the following message:
>>> 
>>>             Could not complete the import command
>>>             because there is no scanner installed.
>>> 
>>> 
>>> If I start the computer in OS 9, I can scan with no problems.
>>> 
>>> I also installed Spell Catcher X after I installed Jaguar.
>>> 
>>> Any clues as to why this is happening?
>>> 
>>> Oh, after I discovered the problem I ran fsck and repaired disk
>>> permissions
>>> and ran fsck again.
>>> 
>>> 
>>> Thanks.
>>> 
>>> Harry,
>>> 
>>> 
>>> Harry Jacobson-Beyer
>>> Surveyor of the Passing Scene!
>>> 
>>> http://bellsouthpwp.net/h/a/harryjb/
>>> What a strange, long, trip it is!
>>> 
>>> remember: it's not how fast you climb the hill that matters, it's how
>>> fast
>>> you go coming down!
>>> 
>>> 
>>> 
>>> | The next meeting of the Louisville Computer Society will
>>> | be January 28. The LCS Web page is <http://www.kymac.org>.
>>> 
>> 
>> 
>> 
>> | The next meeting of the Louisville Computer Society will
>> | be January 28. The LCS Web page is <http://www.kymac.org>.
>> 
> 
> 
> 
> 
> | The next meeting of the Louisville Computer Society will
> | be January 28. The LCS Web page is <http://www.kymac.org>.



| The next meeting of the Louisville Computer Society will
| be January 28. The LCS Web page is <http://www.kymac.org>.


Reply via email to