I found that my Epson Perfection 2450 Scanner would work in 9.2 (not 
Classic) and 10.2 using Photoshop Elements 2 (not the Epson Smart 
Panel).

Anne Cartwright
cartwrig at aye.net

On Wednesday, February 5, 2003, at 12:17  PM, Harry Jacobson-Beyer 
wrote:

> I just installed Epson Twain drivers on my ibook. I started the ibook 
> in
> classic mode installed the drivers and had no problem twain acquiring
> documents/photos into photoshop elements when the computer was booted
> into 9.2. However when I rebooted into jaguar and ran elements in 
> classic
> mode under Jaguar I got the messages as listed below.
>
> Conclusion: There is a conflict with jaguar and Epson that prevents the
> scanner from being seen by applications running in classic.
>
> Vuscan sees the scanner-no problem.
>
>
> Tuesday, January 21, 20033:37 PMJerry Yeagerjerry at browseryshop.com
>
>> Does your Classic Install have the extensions copied/installed over
>>> from the older OS-9 folder?
>> Sometimes you have to re-install the extensions so that Classic knows
>> about them.
>>
>>                                      Jerry
>>
>> p.s. You can also try VueScan as it has been known to work pretty 
>> well.
>>
>> On Tuesday, January 21, 2003, at 11:07  AM, Harry Jacobson-Beyer 
>> wrote:
>>
>>> As you know I updated my desktop G4 - 400 mghz to os x - 10.2.3
>>>
>>> Prior to the upgrade I was able to use my scanner with Photoshop
>>> Elements -
>>> version 1 in classic (operating system 9.2.2). I could "Twain 
>>> Acquire"
>>> images via the scanner with no problem. I could use the epson smart
>>> panel
>>> software in Classic and scan images also with no problem.
>>>
>>> Since upgrading to OS X 10.2.3 I cannot access the scanner from 
>>> within
>>> Classic. When I try I get the following messages:
>>>
>>>             Cannot Find the Scanner on the Bus.
>>>             Please ensure that it is switched on, ready to
>>>             scan and that the cables are attached corectly.
>>>
>>> I click OK and get the following message:
>>>
>>>             Could not complete the import command
>>>             because there is no scanner installed.
>>>
>>>
>>> If I start the computer in OS 9, I can scan with no problems.
>>>
>>> I also installed Spell Catcher X after I installed Jaguar.
>>>
>>> Any clues as to why this is happening?
>>>
>>> Oh, after I discovered the problem I ran fsck and repaired disk
>>> permissions
>>> and ran fsck again.
>>>
>>>
>>> Thanks.
>>>
>>> Harry,
>>>
>>>
>>> Harry Jacobson-Beyer
>>> Surveyor of the Passing Scene!
>>>
>>> http://bellsouthpwp.net/h/a/harryjb/
>>> What a strange, long, trip it is!
>>>
>>> remember: it's not how fast you climb the hill that matters, it's how
>>> fast
>>> you go coming down!



| The next meeting of the Louisville Computer Society will
| be January 28. The LCS Web page is <http://www.kymac.org>.


Reply via email to