[email protected] writes: > On 03/07/16 09:56, Alexander Rössler wrote: >> I tried with wicd and got stuck at the authentication process. >> >> connmanctl does not find any networks, maybe because wicd is interfering? > > I have had huge problems getting wifi to work in the past on some > computers, which was resolved largely by > ensuring there is only ever one network manager installed. > > The other issue is that wicd does not use the /etc/network/interfaces file, > so can work whilst another manager which relies upon it cannot, because > that file is not set up properly. > > If you used a wired connection to initially set up and the switched to > wicd to use wifi, you can find that > there is in fact no wlan0 or whatever in the /etc/network/interfaces > file Thanks, the config seems fine. Wifi works perfectly out-of-the-box with the default kernel of the Jessie image. Guess this problem is related to some incompatibility of wpa_supplicant and the driver in the new kernel.
> > > >> >> Robert Nelson writes: >> >>> On Sat, Jul 2, 2016 at 4:17 PM, Alexander Rössler <[email protected]> >>> wrote: >>>> Thanks, installing the ti-rt kernel 4.4 worked out fine,. QtQuick seems >>>> to work now. However, now I have some problems with wpa_supplicant to >>>> connect to wifi. Is this problem known? >>> are you using connmanctl ? >>> >>> https://wiki.archlinux.org/index.php/Connman#Connecting_to_a_protected_access_point >>> >>> it works the best for us in jessie.. >>> >>> Regards, >> -- Alexander -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
