Re: [Machinekit] Machinekit and T-Rex S-1224

[schoone...@btinternet.com]

Yes, you could use Machinekit to control it. It appears to be a stepper controlled gantry router and the spec says it can be controlled by Mach or Linuxcnc. http://www.cnc-step.co.za/t-rex-1224-cnc-gantry-router There are no configs available for it, for Machinekit or Linuxcnc, that I can find, so you will probably have to select the Mach config that is written for it and use that info to write your own. If you decide to take it on, my advice, do it on a x86 computer using the parallel port, at least initially. Going for a palm sized SoC ARM board just adds several layers of unnecessary complexity. regards On 09/07/16 12:29, vitor.agu...@m-iti.org wrote: Hi Anyone knows if i can use machinekit to control a T-Rex S-1224?? Thanks for the time Vitor Aguiar -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.