Ok. I gonna try and see how it works. Thanks for your time
On Saturday, July 9, 2016 at 1:19:37 PM UTC+1, Schooner wrote: > > Yes, you could use Machinekit to control it. > > It appears to be a stepper controlled gantry router and the spec says it > can be controlled by Mach or Linuxcnc. > http://www.cnc-step.co.za/t-rex-1224-cnc-gantry-router > > There are no configs available for it, for Machinekit or Linuxcnc, that I > can find, so you will probably have to select the Mach config that is > written for it and use that info to write your own. > > If you decide to take it on, my advice, do it on a x86 computer using the > parallel port, at least initially. > Going for a palm sized SoC ARM board just adds several layers of > unnecessary complexity. > > regards > > > On 09/07/16 12:29, [email protected] <javascript:> wrote: > > Hi > > Anyone knows if i can use machinekit to control a T-Rex S-1224?? > > Thanks for the time > > Vitor Aguiar > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
