Dear all:
Now,I can't make the third step and I have tried many times.
My problem is when I write the img to an SD card's boot partition with
bmaptools then the SD card's boot partition can't be found in debian system
and I insert the SD card to windows computer,window system prompts that the
SD card should be formatted.
My operation is as follows:
--First,download the three
files:debian-8.5-console-armhf-2016-08-21-4gb.bmap
debian-8.5-console-armhf-2016-08-21-4gb.img.xz u-boot.img, uncompress the
.xz file
xz -d debian-8.5-console-armhf-2016-08-21-4gb.img.xz
--Then,set the SD card(7744MB) two partition:boot partition(4G FAT32) and
file partition,other setting are 255 heads 63 sectors 1020 cylinders then
format the SD card
sudo mkfs.msdos -F32 /dev/sdc1 -n boot
sudo mkfs.ext4 -L linux /dev/sdc2
--last,write the img to the SD card's boot partition with bmaptools, the
bmaptools version is 3.2
sudo ./bmaptool copy --bmap
debian-8.5-console-armhf-2016-08-21-4gb.bmap
debian-8.5-console-armhf-2016-08-21-4gb.img /dev/sdc1
在 2016年8月21日星期日 UTC+8下午8:59:17，lf写道：
>
> Dear all:
> I'm from China.Recently,I was compiling machinekit running on i386
> computer and zedboard.When I followed machinekit official Documentation in
> the official website—http://www.machinekit.io/,I compile machinekit
> successfully running on the Debain.But when I tried to cross compile
> machinekit to run on zedboard,I found there are not official documentation
> to follow.So I turned to https://github.com/machinekit/machinekit/issues
> and I saw several issues about zedboard.I found there are someone has cross
> compiled machinekit running on zedboard,and there are a video show—
> https://youtu.be/_AcWxu475aY.I was encouraged.
> I found out there are a directory about cross compiling machinekit
> running on zedboard,it is mksocfpga directory.But the README file tell
> about QuartusProjects more and clearer,and I follow the README file in the
> VivadoProjects directory when I executed ./make_bitfile.sh
> microzed/microzed_jd2cb/config then I failed.I have looked back to the
> make_bitfile.sh,I can't understand it embarrassedly.So I turn to there for
> help.We also can discuss there.
> Thanks,guys.
>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
