> Am 23.08.2016 um 07:30 schrieb lf <[email protected]>: > > Dear all: > Now,I can't make the third step and I have tried many times. > My problem is when I write the img to an SD card's boot partition with > bmaptools then the SD card's boot partition can't be found in debian system > and I insert the SD card to windows computer,window system prompts that the > SD card should be formatted. > My operation is as follows: > --First,download the three files:debian-8.5-console-armhf-2016-08-21-4gb.bmap > debian-8.5-console-armhf-2016-08-21-4gb.img.xz u-boot.img, uncompress the > .xz file > xz -d debian-8.5-console-armhf-2016-08-21-4gb.img.xz
sorry, boot/u-boot.img file was uploaded accidentially and is not needed. I deleted those files. please follow the steps under installation here: https://gist.github.com/mhaberler/89a813dc70688e35d8848e8e467a1337 - all you need to to is the bmaptools copy step. Nothing else. I suggest waiting for a few days for the dust to settle. This is NOT finished, I am still working on the SD image packaging. I will announce when we feel confident with it. That said - please use the tracker for issues; we will create anchor issues for those SD images to help through the initial hurdles. - Michael > > --Then,set the SD card(7744MB) two partition:boot partition(4G FAT32) and > file partition,other setting are 255 heads 63 sectors 1020 cylinders then > format the SD card > sudo mkfs.msdos -F32 /dev/sdc1 -n boot > sudo mkfs.ext4 -L linux /dev/sdc2 > > --last,write the img to the SD card's boot partition with bmaptools, the > bmaptools version is 3.2 > sudo ./bmaptool copy --bmap > debian-8.5-console-armhf-2016-08-21-4gb.bmap > debian-8.5-console-armhf-2016-08-21-4gb.img /dev/sdc1 > > > 在 2016年8月21日星期日 UTC+8下午8:59:17，lf写道： > Dear all: > I'm from China.Recently,I was compiling machinekit running on i386 computer > and zedboard.When I followed machinekit official Documentation in the > official website—http://www.machinekit.io/,I compile machinekit successfully > running on the Debain.But when I tried to cross compile machinekit to run on > zedboard,I found there are not official documentation to follow.So I turned > to https://github.com/machinekit/machinekit/issues and I saw several issues > about zedboard.I found there are someone has cross compiled machinekit > running on zedboard,and there are a video show—https://youtu.be/_AcWxu475aY.I > was encouraged. > I found out there are a directory about cross compiling machinekit running > on zedboard,it is mksocfpga directory.But the README file tell about > QuartusProjects more and clearer,and I follow the README file in the > VivadoProjects directory when I executed ./make_bitfile.sh > microzed/microzed_jd2cb/config then I failed.I have looked back to the > make_bitfile.sh,I can't understand it embarrassedly.So I turn to there for > help.We also can discuss there. > Thanks,guys. > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
