HI ALL I was trying to set up my spindle in machinekit. I'm using cramp.ini as my configuration, and then i set A axis as my spindle. (it's not really a spindle it's a 400 step stepper motor i need to turn at a constant speed in my machine). So here is my set up. [AXIS_3]
TYPE = ANGULAR MAX_VELOCITY = 216000 MAX_ACCELERATION = 36 # Set Stepgen max 20% higher than the axis STEPGEN_MAX_VEL = 259200 STEPGEN_MAX_ACC = 43.2 BACKLASH = 0.000 SCALE = 400 MIN_LIMIT = -9999.0 MAX_LIMIT = 999999999.0 FERROR = 1.0 MIN_FERROR = .25 So i run in mdf g01 a800 f400. It's running but not the way i want it to. Is there another way to really set up this as spindle and run gcode to turn it as a spindle in machinekit? Thanks Best Jason -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
