HI Charles Thanks or the reply. Here is the set up. We are using beaglebone black, with polulu drives. Wires are connected directly from bbb to the polulu stepper drivers. I'm using the cramp configuration for now. The image is the latest machinekit image for bbb. I'll check the man pages and see what i can come up with. thanks Best Jason
On Friday, September 9, 2016 at 9:52:07 AM UTC-4, joe2456001 wrote: > > HI ALL > I was trying to set up my spindle in machinekit. I'm using cramp.ini as > my configuration, and then i set A axis as my spindle. (it's not really a > spindle it's a 400 step stepper motor i need to turn at a constant speed in > my machine). So here is my set up. > [AXIS_3] > > TYPE = ANGULAR > MAX_VELOCITY = 216000 > MAX_ACCELERATION = 36 > # Set Stepgen max 20% higher than the axis > STEPGEN_MAX_VEL = 259200 > STEPGEN_MAX_ACC = 43.2 > > BACKLASH = 0.000 > > SCALE = 400 > > > MIN_LIMIT = -9999.0 > MAX_LIMIT = 999999999.0 > > FERROR = 1.0 > MIN_FERROR = .25 > > So i run in mdf g01 a800 f400. It's running but not the way i want it to. > Is there another way to really set up this as spindle and run gcode to turn > it as a spindle in machinekit? > > Thanks > Best > Jason > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
