On Monday, September 26, 2016 at 12:47:11 AM UTC+5:30, hector ice wrote: > > > > On Monday, September 26, 2016 at 12:44:57 AM UTC+5:30, hector ice wrote: >> >> >> >> On Monday, September 26, 2016 at 12:15:14 AM UTC+5:30, Charles >> Steinkuehler wrote: >>> >>> On 9/25/2016 1:29 PM, hector ice wrote: >>> > >>> > I have tried this link, As it has downloaded full kernel and made It >>> image, Than >>> > I have tried that image on sd card than booted up bbb with it. but no >>> luck. I >>> > guess I have missed some step, Can you please clear me where I am >>> wrong. >>> >>> I have no clue. The scripts just build a kernel, they do not create a >>> uSD image (there are other scripts for that). You should start with a >>> working uSD image and add your custom kernel, or you will have lots of >>> problems that I will not help you through on the Machinekit mailing >>> list. >>> >>> Start by booting an unmodified uSD image on your BBB. >>> >>> Build a kernel deb package using RCN's scripts. >>> >>> Copy the resulting deb package to your BBB and install with dpkg. >>> >>> Reboot and you should be running the new kernel. >>> >>> ...at this point, you can start making changes to the kernel source to >>> customize it for your needs. If you can't get this working, you will >>> need to figure out why before you start trying to tweak the kernel. >>> >>> > Also I >>> > want make one full image with xenomai ( RT+Preempt support) So that I >>> can have >>> > only one image, So no need to install packages externally when ever >>> there is >>> > new board comes for configuration. Can you suggest me what should i do >>> to make >>> > that? >>> >>> It sounds like you may not want to use a standard distribution like >>> Debian. If you want a single image for commercial release with no >>> packaging, you may be better off looking into one of the embedded >>> distributions like Yocto (and many others). >>> >>> I am not in favor of yocto also. And I am using only( and I wanted too) >> debian standard distribution . With that I wanted to download and install >> all the packages with patches described by you. I am trying now with the >> steps described. >> >> > Also i will try with machine kit, with xenomai. So that I can have all > with single image. >
Update:- I was trying with 2gb sd-card image from BBB official download site. So it was creating A 2g partition on the disk, so when i ran make menuconfig, it was giving error as low space. But when i increased space via gparted, The location gets changed so when I boot from that sd-card, Kernel panic occurred. So I have 4gb image, With Xenomai patched. but still it won't boot. kernel downloaded from official BBB site, With given Debian distribution 7.5 Version (kernel 3.8) of 4gb. what should i do now.? > -- >>> Charles Steinkuehler >>> [email protected] >>> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
