Hi,
today i received my new bigger screen (old screen 800x480, new 1280x800)
and plugged it into the Beaglebone, first boot was almost normal, except
for it loaded like 100 digits (which i could not recognize, because it was
so fast) i was able to load the machine and everything was normal... then i
rebooted and i get this every time i boot:
{Linux Penguin}
[ 0.349218] omap2_mbox_probe: platform not supported
[ 0.515296] tps65217-b1 tps65217-b1: no platform data provided
[ 0.568342] bone-capemgr bone-capemgr.9: bone: invalid signature
´ffffffff´a
t slot 0
[ 0.576547] bone-capemgr bone-capemgr.9: slot #0 no cape found
[ 0.613297] bone-capemgr bone-capemgr.9: slot #1 no cape found
[ 0.650413] bone-capemgr bone-capemgr.9: slot #2 no cape found
[ 0.687522] bone-capemgr bone-capemgr.9: slot #3 no cape found
[ 0.706640] omap_hsmmc mmc.5: of_parse_phandle_with_args of ´reset´
failed
[ 0.767835] pinctrl-single 44e10800.pinmux: pin 44e10854 already
requested by
44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.779495] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8)
status -22
[ 0.786776] pinctrl-single 44e10800.pinmux: could not request pin 21
on devic
e pinctrl-single
[ 1.025132] tilcdc 4830e000.fb: not sure which CEA mode to set,
leaving as DVI
"no cape found" was already before and worked perfectly
does that mean the display changed something of the pinmux? but that would
be impossible
it does also not boot with the old screen
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
