can´t someone help me?

Am Mittwoch, 28. September 2016 23:05:24 UTC+2 schrieb Sag ich Dir nich:
>
> Hi,
>
> today i received my new bigger screen (old screen 800x480, new 1280x800) 
> and plugged it into the Beaglebone, first boot was almost normal, except 
> for it loaded like 100 digits (which i could not recognize, because it was 
> so fast) i was able to load the machine and everything was normal... then i 
> rebooted and i get this every time i boot:
>
> {Linux Penguin}
> [      0.349218] omap2_mbox_probe: platform not supported
> [      0.515296] tps65217-b1 tps65217-b1: no platform data provided
> [      0.568342] bone-capemgr bone-capemgr.9: bone: invalid signature 
> ´ffffffff´a
> t slot 0
> [      0.576547] bone-capemgr bone-capemgr.9: slot #0 no cape found
> [      0.613297] bone-capemgr bone-capemgr.9: slot #1 no cape found
> [      0.650413] bone-capemgr bone-capemgr.9: slot #2 no cape found
> [      0.687522] bone-capemgr bone-capemgr.9: slot #3 no cape found
> [      0.706640] omap_hsmmc mmc.5: of_parse_phandle_with_args of ´reset´ 
> failed
> [      0.767835] pinctrl-single 44e10800.pinmux: pin 44e10854 already 
> requested by
>  44e10800.pinmux; cannot claim for gpio-leds.8
> [      0.779495] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) 
> status -22
> [      0.786776] pinctrl-single 44e10800.pinmux: could not request pin 21 
> on devic
> e pinctrl-single
> [      1.025132] tilcdc 4830e000.fb: not sure which CEA mode to set, 
> leaving as DVI
>
> "no cape found" was already before and worked perfectly
>
> does that mean the display changed something of the pinmux? but that would 
> be impossible
>
> it does also not boot with the old screen 
>

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to