2016. október 29., szombat 19:23:14 UTC+2 időpontban Schooner a következőt írta: > > > > I think that the main problem is that no-one on this forum has ever > claimed that you can use a 7i90 from a rpi2 >
Yes. that's right, it was not mentioned on this forum. I just thought that it works on machinekit, because the machinekit is installed on the SD image, and here <https://github.com/tinkercnc/spi-fpga-driver/tree/master/RaspberryPi/sandbox> also I found references how to use with machinekit . Maybe it would be necessary to compile MK from sources. I don't know. I tried to use all available information, but I am not an expert at all. > > The way to do this is to get it running with whatever the author of that > thread at the Linuxcnc forum used. > > If you then want to use machinekit, you will need to ensure that all the > elements of the config are the same, or adjust accordingly. > > You can't just use a a Machinekit SD image and ask why it doesn't work. > I found similar issue related to machinekit, therefore I assumed it can be more relevant on this forum than on LinuxCNC. I was just unable to put together all pieces of puzzle correctly. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
