Re: [Machinekit] How to start with DE0-Nano-SoC board?

[schoone...@btinternet.com]

URLs got corrupted somehow Should of course be http://www.mgware.co.uk/temp/debian-8.4-machinekit-de0-armhf-2016-07-20-4gb.bmap and http://www.mgware.co.uk/temp/debian-8.4-machinekit-de0-armhf-2016-07-20-4gb.img.xz ie dot not forward slash after co On 13/11/16 13:32, schoone...@btinternet.com wrote: I have temporarily hosted it at http://www.mgware.co/uk/temp/debian-8.4-machinekit-de0-armhf-2016-07-20-4gb.bmap and http://www.mgware.co/uk/temp/debian-8.4-machinekit-de0-armhf-2016-07-20-4gb.img.xz Create the card image with bmaptool copy debian-8.4-machinekit-de0-armhf-2016-07-20-4gb.img  /dev/sdX from the extracted image Set the MAC code for the NIC on first boot as before, but when booted into the rootfs, update apt but do not run apt-get upgrade, or you will get later files and kernel and this is what does not work for me regards On 13/11/16 11:36, Chen Cheng Xi wrote: Dear schooner, Would you mind share with me the debian-8.4 image link? I am struggle with it now. Thanks! -chengxi On Sun, Nov 13, 2016 at 8:15 PM, schoone...@btinternet.com <schoone...@btinternet.com> wrote: On 13/11/16 10:52, schoone...@btinternet.com wrote: Now , both with an upgraded 8.4 image and a new 8.5 image, the hm2_soc_ol module errors thus Nov 12 15:05:36 mksocfpga msgd:0: startup pid=2818 flavor=rt-preempt rtlevel=1 usrlevel=1 halsize=524288 shm=Posix gcc=4.9.2 version=unknown Nov 12 15:05:36 mksocfpga msgd:0: ØMQ=4.0.5 czmq=3.0.2 protobuf=2.6.1 libwebsockets=<no version symbol> Nov 12 15:05:36 mksocfpga msgd:0: configured: sha=ba632dd Nov 12 15:05:36 mksocfpga msgd:0: built:      Nov 12 2016 12:30:29 sha=ba632dd Nov 12 15:05:36 mksocfpga msgd:0: register_stuff: actual hostname as announced by avahi='mksocfpga.local' Nov 12 15:05:36 mksocfpga msgd:0: zeroconf: registering: 'Log service on mksocfpga.local pid 2818' Nov 12 15:05:36 mksocfpga msgd:0: rtapi_app:2823:user accepting commands at ipc:///tmp/0.rtapi.a42c8c6b-4025-4f83-ba28-dad21114744a Nov 12 15:05:36 mksocfpga msgd:0: hal_lib:2823:rt hm2: loading Mesa HostMot2 driver version 0.15 Nov 12 15:05:37 mksocfpga msgd:0: hal_lib:2823:rt hm2_soc_ol: loading Mesa AnyIO HostMot2 socfpga overlay driver version 0.9 Nov 12 15:05:37 mksocfpga msgd:0: zeroconf: registered 'Log service on mksocfpga.local pid 2818' _machinekit._tcp 0 TXT "uuid=a42c8c6b-4025-4f83-ba28-dad21114744a" "instance=7759df84-a8e9-11e6-9629-bad04a9c4ece" Nov 12 15:05:39 mksocfpga rtapi:0: hal_call_usrfunct(newinst,config="firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo num_stepgens=4 num_encoders=1 num_mencoders=4") failed: -1 - Operation not permitted Nov 12 15:05:39 mksocfpga msgd:0: hal_lib:2823:rt hm2_soc_ol: failed to map hm2-socfpg0 to /dev/uioX Nov 12 15:05:39 mksocfpga msgd:0: hal_lib:2823:rt hm2_soc_ol: soc_mmap_fail hm2-socfpg0 Nov 12 15:05:39 mksocfpga msgd:0: hal_lib:2823:rt hm2/foo: failed to program fpga, aborting hm2_register Nov 12 15:05:39 mksocfpga msgd:0: hal_lib:2823:rt foo: hm2_soc_ol_board fails HM2 registration Nov 12 15:05:39 mksocfpga msgd:0: hal_lib:2823:rt hm2_soc_ol: error registering UIO driver Nov 12 15:05:39 mksocfpga msgd:0: rtapi_app:2823:user hal_call_usrfunct(newinst,config="firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo num_stepgens=4 num_encoders=1 num_mencoders=4") failed: -1 Nov 12 15:05:40 mksocfpga msgd:0: hal_lib:2823:rt hm2: ignoring request to unregister foo: not found Nov 12 15:05:40 mksocfpga msgd:0: hal_lib:2823:rt hm2: unloading This happens irrespective of whether there is a 7i76 attached and is so early in the process that it is something fairly fundamental eg `hm2_soc_ol: failed to map hm2-socfpg0 to /dev/uioX` I am currently in the process of making a debian-8.4 image based card and trying that, in the meanwhile any ideas??? BTW the debian-8.5 image does not seem to include `xauth`, so that needs to be added before you can ssh into it and get X forwarding working. For whatever reason, the debian-8.5 image does not work Just wrote the 8.4 image and did NOT upgrade anything and although not tested yet, the pins are created -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to a topic in the Google Groups "Machinekit" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/machinekit/wqH_V52qdQY/unsubscribe. To unsubscribe from this group and all its topics, send an email to machinekit+unsubscribe@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- Best regards! 陈成细 R&D Engineer (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.