Re: [Machinekit] How to start with DE0-Nano-SoC board?

[schoone...@btinternet.com]

On 16/03/17 14:07, euerka wrote: Recently I got an email <http://mail.terasic.com.tw/epaper/2017/Products/en/de0-nano-eof/> DE0-Nano-SoC was end of life. By the way, now my board is work with Schooner's img. As he mentioned in previous post, 7i76 board was used as interface board? Does it work only with GPIO in board? If so, may I know the hardware configuration the same as Beaglebone P8,P9? This is the GPIO pinout https://github.com/machinekit/mksocfpga/blob/master/HW/QuartusProjects/DE0_Nano_SoC_DB25/DE0_Nano_SoC_DB25.vhd#L376-L450 I have one machine running with stepgens and an encoder off the P2 header and just using GPIO off the P3 header on one of Charles's interface boards for all the limits, home, estop etc Attached is the GPIO pinout to physical DB25 pins Thanks! -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.