Its unclear what you are trying to accomplish. What do you mean by tool change sensor?
On Thursday, November 17, 2016 at 6:19:54 PM UTC-5, Mathias Giacomuzzi wrote: > > Hello, > > What is the right way to start with adding a tool change sensor to my CNC > setup. I use cramps with BBB and machinekit. > > I found that: > http://www.machinekit.io/docs/hal/hal-examples/#manual-toolchange and I > also found that > https://github.com/machinekit/machinekit/tree/master/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch > > There is also a lot of stuff around in the WEB about Tool change an > linuxcnc. It is really not easy to figure out which is now the right script > or way to start with. > > So can some one give me a hint? > > Thanks > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
