I mean such a probe. http://www.ebay.de/itm/321442933434
Am Mittwoch, 23. November 2016 03:29:44 UTC+1 schrieb Mike Ross: > > Its unclear what you are trying to accomplish. What do you mean by tool > change sensor? > > On Thursday, November 17, 2016 at 6:19:54 PM UTC-5, Mathias Giacomuzzi > wrote: >> >> Hello, >> >> What is the right way to start with adding a tool change sensor to my CNC >> setup. I use cramps with BBB and machinekit. >> >> I found that: >> http://www.machinekit.io/docs/hal/hal-examples/#manual-toolchange and I >> also found that >> https://github.com/machinekit/machinekit/tree/master/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch >> >> There is also a lot of stuff around in the WEB about Tool change an >> linuxcnc. It is really not easy to figure out which is now the right script >> or way to start with. >> >> So can some one give me a hint? >> >> Thanks >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
